Fuses - Toro Greensmaster eFlex 1021 Service Manual

Fuses

Accessing the Fuse
Fuse Identification and Function
Electrical System: Testing the Electrical Components
g338648
1. Battery cover
A group of fuses are used to protect the 12 VDC and 48 VDC systems and
are located under the battery cover.
1. Ensure that the cutting-unit-drive lever is in the D
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
the Operator's Manual.
2. Disconnect the battery pack; refer to
Lithium Battery Pack (page
3. Remove the 4 bolts that secures the battery cover to the battery mount; refer
to Figure 48. Remove the battery cover from the battery mount.
g338649
1. Fuse F1-1 (30 A)
2. Fuse F1-2 (3 A)
Refer to Figure 49 to identify each individual fuse and its correct amperage. The
fuses for the Greensmaster eFlex machines have the following functions:
Fuse F1-1 (30 A): Protects main power supply circuits.
Fuse F1-2 (3 A): Protects logic power supply circuits.
Fuse F1-3 (3 A): Protects optional LED work light circuit.
Figure 48
2. Washer head bolt (4 each)
, and remove the key; refer to
FF
Disconnecting and Connecting the
5–3).
Figure 49
3. Fuse F1-3 (3 A)
4. Fuse F1-4 (open)
Page 5–22
position, park the
ISENGAGE
Greensmaster ® eFlex 1021
20248SL Rev C