Kenwood SG-5260 Instruction Manual page 12

STEP
@ LEVEL (dBVSTEP Key
LEVEL (dB): Used when the numeric keys are used f o r d i r e c t l y s e t t i n g the
STEP
® ADDR (address) Key
Used when the numeric keys are used for direct setting of the address. The
sett ing procedure i s the same as for the FREQ key ®
® MOD (modulation) Key
Used when the numer i c keys are used f o r d i r e c t s e t t ing of the modulat ion.
The setting procedure i s the same as for the FREQ key ©
@ Numeric Keys
Used when sett ing data.
of the address changes.
© A F Key
Used for measuring the d e v i a t i o n .
function.
© kHz Key
When the frequency sett ing should be kHz, press t h i s button instead of the
ENT key @.
1 2
: When you want to step up or step down the frequency at a c e r t a i n
i n t e r v a l , set the i n t e r v a l as fol lows.
Press t h i s STEP key and input the step value of the frequency by
using the numeric keys.
RF output l e v e l . The s e t t ing procedure i s the same as f o r the
FREQ (MHz) key ® setting.
i s d B u when "dB f± " 1 i g h t s on the 1 eve 1 u n i t
The s e t u n i t
display and dBm when "dBm" 1ights.
: When you want to step up or step down the leve1 at a c e r t a i n
i n t e r v a l , set the i n t e r v a l as fol lows.
then press t h i s STEP key and input the step value of the LEVEL
by using the numeric keys.
When a numeric key alone i s pressed, the last d i g i t
Press the 2nd F key © .
F i n a l l y press the ENT key ® .
Press the 2nd F key © ,
F i n a l l y press the ENT key @.
sett ing.
s e t t i n g .
Press the key once more to cancel t h i s