S P E C I F I C A T I O N S - Kenwood FG-273 Instruction Manual

< F R E Q U E N C Y CHARACTERISTICS >
G E N E R A L
Output Waveform • • • • Sine wave, square w a v e ,
Oscillation Frequency Range • • 0.02 Hz to 2 MHz
Frequency Accuracy (1) • • Max. ± 1/4 digits (Digital
Frequency Accuracy (2) • • ± 5% of full scale (0.2H to
External Frequency Control ( V C F )
Input Voltage
Frequency Variable Range • • •
Symmetry Variable Range • • • • 1 : 1 to 40 : 1 or more

S P E C I F I C A T I O N S

triangl wave, pulse wave, T T L
/ C M O S - l e v e l square wave, &
ramp wave
7 ranges ( 1 / 1 0 / 1 0 0 / 1 k / 1 0 k /
1 0 0 k / 1 M )
display to output frequency)
2 M H z ) ( Frequency dial to
output frequency)
0 to +10 ; frequency
increases with positive
voltage, max. ± 20 V ( D C +
A C peak)
1000 : 1 or more
DC Offset • • • • • • ± 10V(open circuit)
± 5 V (into 50 O )
continuous variable
Polarity • Inverted or non-inverted
SINE WAVE
Distortion 1% or less (10 Hz to 100 k H z )
Output Frequency Response • • • Within ± 1.0 dB up to
100 kHz (into 50 O , at max.
output)
Output • • Variable
SQUARE WAVE
Symmetry ± 3% or less ( a t 100 Hz)
R i s e / F a l l Time • • • • 100 ns or less ( a t max. output
level)
Output • • • • • • • • Variable
TRIANGL WAVE
Linearity 1%or less ( a t 100 H z )
Output • • Variable
5