Introduction; F E A T U R E S - Kenwood FG-273 Instruction Manual

INTRODUCTION

The M O D E L F G - 2 7 3 Sweep/Function Generator
provides of a function generator, pulse generator, Sweep
oscillator, and frequency counter.

F E A T U R E S

1. Wide-band design : seven ranges cover full oscillation
frequency from 0.02 Hz to 2 MHz
2. Selectable output of sine waves, square waves, and
triangular waves through one-touch operation.
3. T T L / C M O S square wave output connector facilitates
using T T L - l e v e l and C M O S - l e v e l output square waves
as the signal source for experiment of a digital circuit.
4. The symmetry Function varies symmetry of s a w - t o o t h
waves and pulse waves.
It can invert the wave polarity.
5. Equipped with a 6-segment L E D oscillation frequency
display and a counter covering the range from 5 Hz to
10 MHz.
6. Applying voltage from 0 to +10 V to the V C F IN
connector implements external sweep as well as output
frequency control.
7.
•
3.
9.
10. A small and light-weight case with convenient
The log sweep and linear sweep function provides
sweep frequency control up to max. 1000 : 1. Sweep
frequency is variable from 0.5 Hz (2 seconds) to 50
Hz ( 2 0 m i l l i s e c o n d s ) .
Sweep control is implemented by applying sweep signal
to the V C F connector from an external device.
D C voltage ( 0 to ± 10 V ) can be overlaid upon output
waveform.
Combined use of the - 2 0 dB and - 4 0 dB A T T E N U A -
T O R pushbuttons and the continuous attenuator
provides maximum attenuation over 60 dB.
carrying handle, which also serves as a tilting stand.
3