Child Lock; Key Pad Tone Setting; F / °C Selection; Turbo Mode (Heat/Cool Modes Only) - Bosch Climate 5000 Series Installation Instructions Manual

Installation Instructions

7.5 Child Lock

1. Press the TIMER
lock function
2. Press again for 3 seconds to deactivate.

7.6 Key Pad Tone Setting

1. Press SWING
pad tone.
2. Press both buttons again for 3 seconds to enable the key pad tone.
7.7 °F / °C Selection
1. Press or
and °C.

7.8 Turbo Mode (HEAT/COOL modes only)

1. Press the FUNC.
to deactivate the turbo function.
3 6 |
and COPY
and lock all buttons on the wire controller.
and FUNC.
and Timer simultaneously for 3 seconds to change between °F
button to activate the TURBO function. Press the button again
Climate 5000 Series Gen 3 Wired Wall Thermostat (02.2022)
buttons for 3 seconds to activate the child
simultaneously for 3 seconds to disable the key