Follow Me Function; Indoor Unit Only) - Bosch Climate 5000 Series Installation Instructions Manual

7.4 Follow Me Function (Wall Mounted Indoor Unit Only)
By default, room temperature will be measured from the sensor in indoor unit. Follow me
function can be activated in order detect room temperature from the wired wall thermostat
rather than the indoor unit for better comfort.
1. Press the FUNC.
2. When the follow me function
the wire controller.
Figure 35
B y default, Follow me function in the wired thermostat will be turned on with 4-Way
Cassette and Ducted Indoor models.
Climate 5000 Series Gen 3 Wired Wall Thermostat (02.2022)
button to activate the function.
indication appears,the room temperature is detected at
Installation Instructions
Indoor Unit
| 35