3.
Connect the other end of the composite video cable (2) to the composite-in jack on the audio/video
cable.
4.
Connect a 3.5 mm stereo cable (purchased separately) to the audio jacks on your cable or satellite
receiver (3).
5.
Connect the other end of the 3.5 mm stereo cable to the 3.5 mm stereo jack on the audio/video
cable (4).
S-Video
To connect S-Video, follow these steps:
1.
Connect the audio/video cable to the USB port on the TV tuner.
2.
Connect an S-Video cable (purchased separately) (1) to the S-Video-out jack on your cable or
satellite receiver.
NOTE:
jacks on your receiver.
3.
Connect the other end of the S-Video cable to the S-Video-in jack (2) on the audio/video cable.
20
Chapter 5 Advanced connections
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Refer to your cable or satellite receiver user guide for the exact location and labeling of