Step 6: Set Up Your Software; Running The Setup Wizard - HP USB TV Tuner User Manual

Step 6: Set up your software

To set up your software, follow these steps:
1. Turn on the computer.
2. Press the media button on the computer.
3. When the Setup Wizard opens, follow the on-screen instructions to set up your software.

Running the Setup Wizard

NOTE:
change your TV tuner connections, add components, or switch between digital and analog connections,
you must run the Setup Wizard again.
If the Setup Wizard fails to open after you perform the proceeding steps, or if you have already run the
Setup Wizard and would like to run it again, perform either of the following procedures.
To run the Setup Wizard using MediaSmart, follow these steps:
1. Open MediaSmart:
●
●
2. Click the TV icon on the SmartMenu.
3. Click the Settings icon, and then click Run Setup Wizard.
4. Follow the on-screen instructions.
To run the Setup Wizard using QuickPlay, follow these steps:
1. Open QuickPlay:
●
●
2. Click the TV icon on the QuickPlay menu.
NOTE:
QuickPlay will show a Slingbox demo video. You must wait until the video is complete to perform
the following steps.
3. Click the Info/More Settings icon on the menu bar at the top right of the screen.
4. Click Run Setup Wizard from the menu.
5. Select the country or region where you live from the box in the Setup Wizard.
6. Select the source for your TV signal from the pull-down menu in the Setup Wizard.
7. Click the Auto Scan for TV Channels Now button in the Setup Wizard.
14 Chapter 3 TV tuner setup
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
When you set up the TV tuner for the first time, you must run the Setup Wizard. Later, if you
On your computer, click Start, and then click HP MediaSmart.
– or –
Press the media button on the computer.
On your computer, click Start, and then click QuickPlay.
– or –
Press the media button on the computer.
If this is the first time you have selected the TV icon from the QuickPlay menu, then