HP iPAQ hw6900 Product Information Manual page 42

NOTE If a screen displays several messages, click on the link that reads If
your company supports synchronizing directly with its
Exchange Server you can set up your device to synchronize
with it, you'll be led through a series of steps to synchronize your e-mail
account with the Exchange Server. Otherwise, continue with the
steps below.
2. Tap Menu > Configure Server.
If you have not set up a synchronization server link, the following message is
displayed: Add Server Source.
3. In the Server address box, enter the name of the server running
Exchange 2003.
4. Select the This server requires an encrypted (SSL) connection
check box if required by your IT department.
Most companies require this option, and if you do not check this box, you
will be unable to sync with your company Exchange Server.
5. Tap Next.
6. Enter your name, password, and domain, and then tap Next.
7. Select the Save password text box if you want to enable automatic sync.
8. To change the rules for resolving synchronization conflicts, tap Advanced.
9. Select the check boxes for the types of information items that you want to
synchronize with Exchange Server.
10. To change available synchronization settings, select the type of information
and tap Settings.
1 1. Tap Finish.
You can set up your HP iPAQ to synchronize with Exchange Server over a wireless
network or through a cable, cradle, infrared, or Bluetooth connection to a personal
computer. You must have the following information to sync wirelessly: server name,
user name, password, and domain name.
NOTE Synchronizing directly with Exchange Server is supported only on
Windows Mobile-powered Pocket PC 2002 or later.
By clicking Tools > Options, you can determine whether an information type
is synchronized with a personal computer or with Exchange Server.
32