Bosch AdvancedTemp Original Instructions Manual page 33

Mode selection
Surface temperature mode (see figure A)
ure mode.
You can use this mode to measure the temperature of radiators, underfloor heating or
fridge interiors, for example.
Bosch Power Tools
To open the mode menu, press the ON/OFF button/mode
button (12). Use the ON/OFF button/mode button (12) to
select the required mode. Confirm your selection by pressing
the measure button (1) or the emissivity button (13).
To return to the previous mode, press the back button/delete
button (11).
Surface temperature mode is used to measure the surface
temperature of an object.
Press the measure button (1) and aim the laser circle so that
it is perpendicular to the centre of the object being meas-
ured. The surface temperature measured (h) is displayed in
the area of the display with the white background. When the
next measurement is taken, the previously measured value
appears in the display (i).
Press the back button/delete button (11) to delete the meas-
ured value (h) in the area of the display with the white back-
ground.
The indicator LED (15) does not light up in surface temperat-
English | 33
1 609 92A 7M8 | (03.05.2022)