Page 1
Washer dryer WNG2540KGR en Instruction Manual and Installation Instructions...
Page 2
Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
Intended use Cleaning and maintenance . . . 42 Intended use Appliance housing/control panel . . . 42 Drum ......42 This appliance is intended for private ■...
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility.
Page 7
Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed.
Page 9
Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance.
Page 11
Safety instructions Repairs and any other work Warning ■ on the appliance must only Risk of injury/material be conducted by our damage/damage to the customer service or by an appliance! electrician. The same applies The use of spare parts and for replacing the mains cable accessories supplied by other (when necessary).
Environmental protection Reduce the washing temperature for Environmental lightly and normally soiled laundry. protection At low temperatures, the appliance ■ consumes less energy. For light to P ackaging/used appliance normal soiling, lower temperatures E n v i r o n m e n t a l p r o t e c t i o n than indicated on the care label are Dispose of packaging in an also sufficient.
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:...
Positioning and connecting When the appliance is lifted by its Installation on a base or a ■ protruding parts (e.g. the appliance wooden joist floor door), the components may break off and cause injuries. Caution! Do not lift the appliance by Damage to the appliance protruding parts.
Positioning and connecting Removing the transport locks Unscrew and remove all four transport brace screws. Caution! Damage to the appliance The appliance is secured for ■ transportation using transport locks. If the transport locks are not removed, the appliance may become damaged when it is operated.
Positioning and connecting Lock the covers firmly in place by Remove the transport strut. applying pressure to the snap-in hooks. Hose and cable lengths Removing the support struts Connection on left side Unscrew and remove all screws in the vertical transport struts. ( ~ 130 cm 0 ~ 150 cm Remove the transport struts.
Positioning and connecting The following are available from Tip: Optimum water pressure in the supply specialist dealers/the after-sales network service: At least 100 kPa (1 bar) An extension for Aqua-Stop or cold ■ Maximum 1000 kPa (10 bar) water supply hose (approx. 2.50 m); order no.
Positioning and connecting Connect also an external water Tip: Connection filter (depending on the model) Drainage into a siphon between water supply hose and tap. ■ The connection point must be The filter filters dirt particles out of the water. secured using a hose clamp with a Water filter must be cleaned regularly diameter of 24 - 40 mm (available...
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Risk of death! Incorrect levelling may result in intense noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a wrench, Never touch or hold the mains plug ■...
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the Βαμβακερά...
Page 21
Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The support struts must be ■ removed. ~ "Removing the support struts" on page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 15 a) Clip the mains cable securely in Pour approx.
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap...
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 34 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 35 Έναρξη/Προσθήκη ρούχων (Start/Reload) button for starting, interrupting, (e.g.
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting Στόχος οτεγνώματος (Drying ¾/»/ö Display Setting Description Target) — - 90° 6 Θερμοκρ. Temperature that AntiStain °/¶/º/· (Temp.°C) can be set in °C T Πρόπλυση (Prewash) —...
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■...
Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■...
Detergents and care products Notes Detergents and care Only use liquid detergents that are ■ products self-flowing Do not mix different liquid detergents ■ Do not mix detergent and fabric Y ou can protect your appliance and ■ softener D e t e r g e n t s a n d c a r e p r o d u c t s your laundry by selecting and using the Do not use products which have correct detergents and care products.
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max.
Page 29
Overview of programmes Programme/Type of laundry Options/Information Eco 40-60 10,0 kg/6,0 kg Suitable for washing normally soiled cotton,linen and mixed fab- ric textiles, and drying it to be immediately stored in a cupboard. 400 - 1400 rpm Notes AntiStain, T Πρόπλυση (Prewash), Textiles which are washable based on the laundry symbol ■...
Page 30
Overview of programmes Programme/Type of laundry Options/Information Υγιεινή για ευαίσθητα (Hygiene Care) 4,0 kg/2,5 kg An innovative program, pretreat dry laundry by hot air (up to — - 30 °C 65°C) to for additional hygienic demands, followed by a low 400 - 1400 rpm temperature washing cycle.
Page 31
Overview of programmes Programme/Type of laundry Options/Information Μάλλινα (Wool) W 2,0 kg/1,0 kg Hand- or appliance-washable fabrics that are made of wool or — - 40 °C contain wool; 2 - 800 rpm particularly gentle wash programme to prevent laundry from shrinking, with longer pauses in the programme (during which the items rest in the water).
Page 32
Overview of programmes Programme/Type of laundry Options/Information ‰ Απαλό στέγνωμα (Gentle Dry) -/2,5 kg Single gentle dry programme for drying garments with lower temperature, - by selecting ¾ to achieve automatic cupboard+ dry result, - by selecting » to achieve automatic cupboard dry result, Στόχος...
Programme default settings Λήξη σε/Διάρκεια (Finish in/ Programme default Time Dry) settings Before starting the programme, you can preselect the programme end Y ou can change the default settings for P r o g r a m m e d e f a u l t s e t t i n g s ("Finish in"...
Additional programme settings The drying process would proceed Additional programme followed washing process when the settings Στόχος οτεγνώματος (Drying Target) activated. If you only need the individual drying progamme, you can select You can find possible additional N ote: ‰ Εντατικό στέγνωμα (Intensive Dry), A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;...
Operating the appliance T Πρόπλυση (Prewash) Operating the Prewash for heavily soiled laundry. appliance Touch T Πρόπλυση (Prewash) to P reparing the appliance activate or deactivate it. O p e r a t i n g t h e a p p l i a n c e The appliance was tested before Put the detergent into dispenser I Note:...
Operating the appliance Select programme/switch on Notes Unfold and load presorted items the appliance ■ of laundry. Mix large and small items. Washing items of different If you have activated the Note: size distribute themselves better childproof lock, you must first deactivate during the spin cycle.
Page 38
Operating the appliance Filling the dispensers Measuring aid A* for liquid detergent *depending on the model Pull out the detergent drawer. Warning Position the measuring aid A for measuring the correct amount of liquid Eye / skin irritation! detergent: If the detergent drawer is opened Pull out the detergent drawer.
Operating the appliance Starting the programme Adding/removing laundry Touch and hold Έναρξη/Προσθήκη After starting the programme (only for ρούχων (Start/Reload) button for 1~2 washing), you can add or remove seconds, then release the button. The laundry if necessary. programme starts and the appliance Touch the Έναρξη/Προσθήκη...
Operating the appliance Cancel the programme If you do not take laundry out within ■ 15 mins after drying process finished, wrinkle guard process will For programmes washing at high start to prevent laundry getting temperatures: wrinkled. The process lasts about 30 Touch the Έναρξη/Προσθήκη...
Appliance settings 4: Switching the drum care ■ Appliance settings information signal on/off. Y ou can change the following settings: Ž A p p l i a n c e s e t t i n g s Œ off The volume of the end signal.
Cleaning and maintenance Drum Cleaning and maintenance Warning Risk of injury/material damage/ damage to the appliance! Warning C l e a n i n g a n d m a i n t e n a n c e Permanently washing at low Risk of death! temperatures and a lack of ventilation There is a risk of electric shock if touch...
Cleaning and maintenance Emptying the detergent draw, Fit the insert and lock it in place (push the cylinder onto the guide cleaning the detergent drawer pin). and its housing If the appliance contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer.
Cleaning and maintenance Drain pump is blocked Carefully unscrew the pump cover; residual water may leak out. Clean the interior, pump cover Turn the water tap off to prevent Note: thread and pump housing. The more water from flowing in and to impeller in the drain pump must be ensure that it is drained via the pump.
Cleaning and maintenance The drain hose at the siphon Clean the filters: is blocked Disconnect the hose from the rear of the appliance. Turn the programme selector to Off. Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.
Faults and what to do about them Caution! Faults and what to do Water damage! about them Any escaping water may cause water damage. E mergency release Do not open the door if water can be F a u l t s a n d w h a t t o d o a b o u t t h e m seen through the glass.
Page 47
Faults and what to do about them Display Cause/Remedy Flashes (no water supply): Water tap turned on? Filter in the water supply is ■ blocked? ~ "Filter in the water supply is blocked" on page 45 Is the supply hose kinked or trapped? Lights up (low water pressure): For information only.
Faults and what to do about them Faults and what to do about them Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ appliance. Tighten the screw fitting on the supply hose. ■ The door cannot be ~~~ (Rinse hold = no final drain) is activated (depending on the ■...
Page 49
Faults and what to do about them Faults Cause/Remedy The water is not draining. Drain pipe or water drain hose is blocked. Clean the drain pipe and the ■ water drain hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain ■...
Page 50
Faults and what to do about them Faults Cause/Remedy The spin cycle runs sev- Not a fault – the unbalanced load detection system is adjusting an imbalance. eral times. The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■...
Page 51
Faults and what to do about them Faults Cause/Remedy Creasing. Creasing occurs when you have exceeded the maximum load or selected ■ the wrong program for the type of fabric. All the required information can be found in the programme overview table. Remove clothes immediately after drying;...
Customer Service If you contact Customer Service, you Customer Service will require the product number (E-Nr.) and the production number (FD) of your I f you have any queries on use, are appliance. C u s t o m e r S e r v i c e unable to rectify faults on the appliance The contact details for Customer yourself or if your appliance needs to be...
Consumption values Consumption values T he following information is provided in accordance with the EU-Ecodesign- C o n s u m p t i o n v a l u e s Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456 and EN62512.
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 59,0 cm In addition to warranty claims against (height x width x depth)
Page 56
Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.