Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WNA14400ES
Summary of Contents for Bosch WNA14400ES
- Page 1 Washer dryer WNA14400ES en Instruction Manual and Installation Instructions...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 41 Intended use Appliance housing/control panel . . . 41 Drum ......41 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility. - Page 7 Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
-
Page 8: Operation
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed. - Page 9 Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
-
Page 10: Cleaning/Maintenance
Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance. - Page 11 Safety instructions Repairs and any other work Warning ■ on the appliance must only Risk of injury/material be conducted by our damage/damage to the customer service or by an appliance! electrician. The same applies The use of spare parts and for replacing the mains cable accessories supplied by other (when necessary).
-
Page 12: Environmental Protection
Environmental protection Reduce the washing temperature for Environmental lightly and normally soiled laundry. protection At low temperatures, the appliance ■ consumes less energy. For light to P ackaging/used appliance normal soiling, lower temperatures E n v i r o n m e n t a l p r o t e c t i o n than indicated on the care label are Dispose of packaging in an also sufficient. -
Page 13: Positioning And Connecting
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:... -
Page 14: Installation Surface
Positioning and connecting If the hose and mains cables are not On wooden joist floors, install the Note: ■ routed properly, there is a risk of appliance: tripping and injury. In a corner, if possible, ■ Lay hoses and cables in such a way On a water-resistant wooden board ■... - Page 15 Positioning and connecting Keep the screws and sleeves in b) Remove the sleeves. Note: a safe place. Fit the covers. Take the hoses out of the holders. Lock the covers firmly in place by applying pressure to the snap-in hooks. Unscrew and remove all four transport brace screws.
-
Page 16: Removing The Support Struts
Positioning and connecting Removing the support struts Hose and cable lengths Connection on left side Unscrew and remove all screws in the vertical transport struts. Remove the transport struts. ( ~ 130 cm 0 ~ 150 cm 8 ~ 90 cm @ 60 cm ~ 100 cm Connection on right side Undo and remove the screws on the... -
Page 17: Water Inlet
Positioning and connecting Water inlet Connection Connect the water supply hose to Warning the water tap (¾" = 26.4 mm) and to Risk of death! the appliance: There is a risk of electric shock if you – Model: Standard touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve). -
Page 18: Water Outlet
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Drainage into a siphon connection points. The screw ■ The connection point must be connection is under mains water secured using a hose clamp with a pressure. -
Page 19: Alignment
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Risk of death! Incorrect levelling may result in intense noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a wrench, Never touch or hold the mains plug ■... -
Page 20: Before Washing For The First Time
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the i Algodón/Algodão 90°C (Cottons supply hose. - Page 21 Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The support struts must be ■ removed. ~ "Removing the support struts" on page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 14 a) Clip the mains cable securely in Pour approx.
-
Page 22: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 23: Control Panel
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 34 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 35 Inicio/Pausa + Carga (Start/ Reload) button for starting, interrupting, (e.g. -
Page 24: Display Panel
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting Tipo secado (Drying Aim) ¾/»/ö Display Setting Description T Prelav. (Prewash) — - 90° Temp.°C Temperature that p Fácil (Reduced Ironing) can be set in °C SpeedPerfect —... -
Page 25: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■... -
Page 26: Preparing Laundry For Drying
Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■... -
Page 27: Detergents And Care
Detergents and care products Notes Detergents and care Only use liquid detergents that are ■ products self-flowing Do not mix different liquid detergents ■ Do not mix detergent and fabric Y ou can protect your appliance and ■ softener D e t e r g e n t s a n d c a r e p r o d u c t s your laundry by selecting and using the Do not use products which have correct detergents and care products. -
Page 28: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 29 Overview of programmes Programme/Type of laundry Options/Information Eco 40-60 9,0 kg/6,0 kg Suitable for washing normally soiled cotton,linen and mixed fab- ric textiles, and drying it to be immediately stored in a cupboard. 400 - 1400 rpm Notes T Prelav. (Prewash), p Fácil Textiles which are washable based on the laundry symbol ■...
- Page 30 Overview of programmes Programme/Type of laundry Options/Information ; Antialergias (AllergyPlus) 6,5 kg/5,0 kg Hard-wearing fabrics made of cotton or linen. — - 60 °C Note: Particularly suited to washing items that need to be hy- 400 - 1400 rpm gienically clean and especially kind to sensitive skin thanks to T Prelav.
- Page 31 Overview of programmes Programme/Type of laundry Options/Information p Lana/Lãs (Wool) W 2,0 kg/1,0 kg Hand- or appliance-washable fabrics that are made of wool or — - 40 °C contain wool; 2 - 800 rpm particularly gentle wash programme to prevent laundry from shrinking, with longer pauses in the programme (during which the items rest in the water).
- Page 32 Overview of programmes Programme/Type of laundry Options/Information ‰ Secar suave (Gentle Dry) -/2,5 kg Single gentle dry programme for drying garments with lower temperature, - by selecting ¾ to achieve automatic cupboard+ dry result, - by selecting » to achieve automatic cupboard dry result, Tipo secado (Drying Aim) è...
-
Page 33: Drying Table
Overview of programmes Drying table Estimated drying time (min) Recommended drying programme Drying ö » ¾ load (kg) (Iron dry) (Cupboard dry) (Cupboard dry+) 1.0-2.0 45-60 50-80 65-100 ‰ Secar intensivo (Intensive Dry) 2.0-4.0 60-90 80-140 100-160 4.0-6.0 90-140 140-200 160-270 0.5-1.5 35-45... -
Page 34: Programme Default Settings
Programme default settings Terminado en/em (Finish in/ Programme default Time Dry) settings Before starting the programme, you can preselect the programme end Y ou can change the default settings for P r o g r a m m e d e f a u l t s e t t i n g s ("Finish in"... -
Page 35: Additional Programme
Additional programme settings you only need the individual drying Additional programme progamme, you can select ‰ Secar intensivo (Intensive Dry), ‰ Secar settings suave (Gentle Dry) or ‰ My Time Dry. You can find possible additional N ote: Notes A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;... -
Page 36: Operating The Appliance
Operating the appliance Select programme/switch on Operating the the appliance appliance If you have activated the Note: P reparing the appliance childproof lock, you must first deactivate O p e r a t i n g t h e a p p l i a n c e it before you can set a programme. -
Page 37: Dosing And Adding Detergent And Care Products
Operating the appliance Notes Filling the dispensers Unfold and load presorted items ■ Pull out the detergent drawer. of laundry. Mix large and small items. Washing items of different Warning size distribute themselves better Eye / skin irritation! during the spin cycle. Individual If the detergent drawer is opened items of washing may cause while the appliance is running,... -
Page 38: Starting The Programme
Operating the appliance Starting the programme Measuring aid A* for liquid detergent *depending on the model Touch and hold Inicio/Pausa + Carga (Start/Reload) button for 1~2 seconds, Position the measuring aid A for then release the button. The programme measuring the correct amount of liquid starts and the appliance door is locked. -
Page 39: Adding/Removing Laundry
Operating the appliance Adding/removing laundry Cancel the programme For programmes washing at high After starting the programme (only for temperatures: washing), you can add or remove Touch the Inicio/Pausa + Carga laundry if necessary. (Start/Reload) button. Touch the Inicio/Pausa + Carga (Start/ To cool down laundry: Select Reload) button. -
Page 40: Removing Laundry/Switching Off The Appliance
Appliance settings Removing laundry/switching You will need to activate the setting mode in order to change these settings. off the appliance Set programme selector to Û (Off). Open the door and remove the laundry. Turn off the water tap. Not required for Aqua-Stop Note: models. -
Page 41: Sensors
Sensors Appliance housing/control Sensors panel U nbalanced load detection Remove the detergent residue S e n s o r s ■ system immediately. Wipe the housing and the control ■ The automatic unbalanced load panel with a soft, damp cloth. detection system detects imbalances Do not use abrasive cloths, sponges ■... -
Page 42: Emptying The Detergent Draw, Cleaning The Detergent Drawer And Its Housing
Cleaning and maintenance Emptying the detergent draw, Fit the insert and lock it in place (push the cylinder onto the guide cleaning the detergent drawer pin). and its housing If the appliance contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. - Page 43 Cleaning and maintenance Open the service flap. Refit and screw on the pump cover. The handle must be in a vertical position. Take the drain hose out of the retainer. Remove the sealing cap and pour Close the service flap. the water out into a suitable container.
-
Page 44: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance The drain hose at the siphon Clean the filters: is blocked Disconnect the hose from the rear of the appliance. Turn the programme selector to Û (Off). Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose;... -
Page 45: Faults And What To Do About Them
Faults and what to do about them Caution! Faults and what to do Water damage! about them Any escaping water may cause water damage. E mergency release Do not open the door if water can be F a u l t s a n d w h a t t o d o a b o u t t h e m seen through the glass. - Page 46 Faults and what to do about them Display Cause/Remedy Flashes (no water supply): Water tap turned on? Filter in the water supply is ■ blocked? ~ "Filter in the water supply is blocked" on page 44 Is the supply hose kinked or trapped? Lights up (low water pressure): For information only.
-
Page 47: Faults And What To Do About Them
Faults and what to do about them Faults and what to do about them Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ appliance. Tighten the screw fitting on the supply hose. ■ The door cannot be ~~~ (Rinse hold = no final drain) is activated (depending on the ■... - Page 48 Faults and what to do about them Faults Cause/Remedy The water is not draining. Drain pipe or water drain hose is blocked. Clean the drain pipe and the ■ water drain hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain ■...
- Page 49 Faults and what to do about them Faults Cause/Remedy The spin cycle runs sev- Not a fault – the unbalanced load detection system is adjusting an imbalance. eral times. The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■...
- Page 50 Faults and what to do about them Faults Cause/Remedy Creasing. Creasing occurs when you have exceeded the maximum load or selected ■ the wrong program for the type of fabric. All the required information can be found in the programme overview table. Remove clothes immediately after drying;...
-
Page 51: Customer Service
Customer Service If you contact Customer Service, you Customer Service will require the product number (E-Nr.) and the production number (FD) of your I f you have any queries on use, are appliance. C u s t o m e r S e r v i c e unable to rectify faults on the appliance The contact details for Customer yourself or if your appliance needs to be... -
Page 52: Consumption Values
Consumption values Consumption values T he following information is provided in accordance with the EU-Ecodesign- C o n s u m p t i o n v a l u e s Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456 and EN62512. -
Page 53: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 59,0 cm In addition to warranty claims against (height x width x depth) - Page 56 Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.