Advertisement
Mounting a terminal plug
11
Connection of the electrical wires
1.
Remove the set screws to remove the cover.
2.
Loosen the cable clamp securing screws and insert the
electrical cableinto the cover.
3.
Connect the electrical wires to the terminal board by either
using crimp terminals or by winding the wires around the
terminals.
4.
Fit the cover into the body and secure it by tightening the set
screws.
5.
Tighten the cable clamp securing screws to secure the
electrical cable.
Caution
Securely fasten the terminal screws.
●
(Proper torque: 0.8 N ・ m 〜 1 N ・ m)
Doing so may result in a fire.
Do not slide the plug with having come in the duct.
●
Doing so may result in faulty connection, thus leading to a fire.
Duct
Lever
Ground terminal
（M3.5）
Cover
Securing screw
Notes
Do not attach the plug unit where the tapping
●
screw is used the duct directiy
12
Mounting reeler outlet
・To mount the reeler outlet, pull down the plug lever, andthen
Polarity indication
(ground side)
Terminal Plug
Dismounting plug
・Pull up the plug lever, and then rotate it counterclockwise by
90 degrees.
Set screw
Up-and-down handling the outlet
Body
・
Terminal screw
（M3.5）
・
Terminal board
・
Retaining the cap of fixture used
・Hitch the cord on the cord hook of the outlet to use the fixture.
Cable clamp
9
Procedure for mounting and
using reeler outlet plug
rotate it clockwise by 90 degrees.
Duct
Lever
Caution
Do not slide the plug with having come in the duct.
●
Doing so may result in faulty connection, thus leading to a fire.
Notes
Do not attach the plug unit where the tapping screw is used
●
the duct directiy
The outlet can expand and contract in the range of
approximately 80 to 180 cm from the mounting surface.
Pull down the main body of the outlet. It stops in a position in
which pull down.
To return the main body to the original position, press and
hold the pushbutton press and hold the pushbutton to push up
the main body to a position to which you want to return it.
(Releasing the pushbutton will stop it on the spot.)
reeler outlet
Push button
Polarity indication
(ground side)
Reeler
outlet plug
Cord hook
Advertisement
