1. Manuals
  2. Brands
  3. HP Manuals
  4. Desktop
  5. KAYAK XM600
  6. User manual

HP Kayak XM600 User Manual

Hp kayak xm600: users guide
Hide thumbs Also See for Kayak XM600:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, Handbook
HP Kayak XM600
HP Kayak XU800

Advertisement

Table of Contents
loading

Related Manuals for HP Kayak XM600

Summary of Contents for HP Kayak XM600

  • Page 1 HP Kayak XM600 HP Kayak XU800...

  • Page 3: Table Of Contents

    Viewing the HP Summary Screen ......Using the HP Setup Program.......
  • Page 4 If Your PC Has a Hardware Problem......62 Using HP MaxiLife to Diagnose Problems ....64 HP DiagTools Hardware Diagnostics Utility .

  • Page 5: Notice

    Intel Corporation. Rambus and RDRAM are registered trademarks of Rambus Inc. Direct Rambus, Direct RDRAM and RIMM are trademarks of Rambus Inc. Hewlett-Packard France Business Desktop Division (BDD) 38053 Grenoble Cedex 9 France 1999 Hewlett-Packard Company...

  • Page 6: Important Warnings

    Important Warnings Avoid Electrical Shocks WARNING To avoid electrical shock, do not open the power supply. There are no user-serviceable parts inside. To avoid electrical shock and harm to your eyes by laser light, do not open the laser module. The laser module should only be serviced by service personnel.

  • Page 7: Information On Ergonomic Aspects

    Please return used batteries either to the shop from which you bought them, to the dealer from whom you purchased your PC, or to HP so that they can either be recycled or disposed of in the correct way .

  • Page 8: Information And Help

    Setting Up and Using Your PC Workstation Reference Operating System Online Help Start Help Contents Operating System User’s Guide This guide Troubleshooting and Support HP Warranty and Support Guide HP Support and Information Services HP Troubleshooting Guide, downloadable from: http://www.hp.com/go/kayaksupport...
  • Page 9 PC Workstation. This documentation is provided in Adobe Acrobat (PDF) format. The documentation for your PC Workstation is available free of charge on the HP web site: http://www.hp.com/go/kayaksupport, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu. This includes: •...

  • Page 10: Technical Information

    Technical Information The following table shows standard configurations for HP Kayak XM600 and XU800 PC Workstations. Weight (excl. keyboard and display) Dimensions Footprint Storage temperature Storage humidity Operating temperature Operating humidity Acoustic noise emission (as defined ISO 7779): • Operating (typical)

  • Page 11: Setting Up And Using Your Pc Workstation

    Setting Up and Using Your PC Workstation WARNING If you are in any doubt that you can lift the PC Workstation and the display safely, do not try to move them without help. When you receive your PC Workstation, unpack all of the components. Place the PC Workstation on a sturdy desk with easily accessible power outlets and enough space for the keyboard, mouse, and any other accessories.

  • Page 12: Connecting Devices

    Connecting Devices Connecting Devices For your own safety, it is recommended that you first read the warning notices on pages 6 and 7. External SCSI connector for HP Kayak XU800 models only Keyboard connector Dual USB connectors Serial port A...

  • Page 13: The Maxilife Status Panel

    Reset Button Hard Disk Activity Light HP MaxiLife and its HP MaxiLife and its LCD screen helps you diagnose problems with your PC Liquid Crystal Workstation and provides system information you may need to obtain Display (LCD) support. Press one of the LCD control buttons to display the menu. Use to scroll through the menu items and For more information on using the LCD, refer to “Using HP MaxiLife to...

  • Page 14: Starting And Stopping Your Pc Workstation

    1 Setting Up and Using Your PC Workstation Starting and Stopping Your PC Workstation Starting and Stopping Your PC Workstation Starting Your PC Workstation for the First Time If your PC Workstation has preinstalled software, it is initialized the first time you start the PC Workstation.
  • Page 15 To initialize your software: Turn on the display first, then the PC Workstation. When the PC Workstation is switched on, the HP PC Workstation’s logo is displayed. The PC Workstation performs a Power-On-Self-Test (POST). The software initialization process starts. It displays the software license...

  • Page 16: Using Your Hp Enhanced Multimedia Keyboard (Some Models Only)

    Using Your HP Enhanced Multimedia Keyboard (some models only) Using Your HP Enhanced Multimedia Keyboard (some models only) The HP enhanced multimedia keyboard includes soft keys you can use to: • Display and configure the actions assigned to keys. •...

  • Page 17: Viewing The Hp Summary Screen

    Viewing the HP Summary Screen The HP Summary Screen gives you a summary of the current configuration of your PC Workstation. It is recommended that you check the configuration of your PC Workstation when you first use it and each time after you install, remove, or upgrade accessories.

  • Page 18: Using The Hp Setup Program

    For more information on the Setup program, refer to the Troubleshooting Guide, available on the HP web site at: http://www.hp.com/go/kayaksupport, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu. to load the Setup default values to recover. while Setup is displayed at the bottom of the screen.

  • Page 19: Setting Passwords In The Hp Setup Program

    Setting Passwords in the HP Setup Program You can set passwords to provide different levels of protection for your PC Workstation, the Administrator password, the User password and the Power-on password. You set these passwords using the Security menu in the Setup program.

  • Page 20: Using Power Management

    Manageability Your PC is highly manageable. HP TopTools is a device management tool that can help you in troubleshooting and makes remote administration easier. For more information about TopTools, connect to HP’s web site at: www.hp.com/toptools.

  • Page 21: Installing And Replacing Hardware Parts In Your Pc Workstation

    Installing and Replacing Hardware Parts in Your PC Workstation This chapter provides information about installing accessories and replacing hardware parts in your PC Workstation. HP UltraFlow Airflow Guide Rear Fan Spare mounting rails (not shown) for: - 3.5-inch (short green) devices (for example, zip drive), - 5.25-inch (long green) devices,...
  • Page 22 2 Installing and Replacing Hardware Parts in Your PC Workstation HP Kayak XM600 PC Workstation System Board Depending on the model, the memory module sockets support either: • Two RDRAM modules. • Two SDRAM modules installed in a Memory Expansion Card.

  • Page 23: Removing And Replacing The Cover And Front Bezel

    Removing and Replacing the Cover and Front Bezel Removing the For your own safety, it is recommended that you first read the warning Cover notices on pages 6 and 7. Switch off the display and computer. Disconnect all power cables and any LAN or telecommunications cables.
  • Page 24 2 Installing and Replacing Hardware Parts in Your PC Workstation Removing and Replacing the Cover and Front Bezel NOTE Take care when removing the upper and lower bezels. They are not on a hinge, so do not force them open. To remove the upper and lower bezels: Replacing the Cover Ensure that all internal cables are properly connected and safely routed.

  • Page 25: Removing And Replacing The Airflow Guide

    Guide Remove the PC Workstation’s cover (refer to page 23). Grasp the handle on top of the HP UltraFlow Airflow Guide, then slide it out of the PC Workstation. Lift the HP UltraFlow Airflow Guide upwards to remove it from the PC Workstation’s case.

  • Page 26: Removing And Replacing A Processor

    Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. Remove the PC Workstation’s cover (refer to page 23 for instructions). Remove the HP UltraFlow Airflow Guide (refer to page 25). If you intend to: Remove a Processor: Press the retention clips on both sides of the processor outwards.
  • Page 27 VRM delivered with the processor accessory kit must be installed in this socket. A VRM is not required on the HP Kayak XM600 PC Workstation. Replace the HP UltraFlow Airflow Guide (refer to page 25). Replace the PC Workstation’s cover (refer to page 24). Reconnect all the power and telecommunications cables.

  • Page 28: Removing, Replacing And Upgrading Memory

    XM600 models IMPORTANT NOTE 2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XM600 models Removing the Memory Expansion Card with one or two SDRAM module(s) RIMM0 and RIMM1 sockets each contain...
  • Page 29 2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XM600 models Removing the Memory Expansion Card and SDRAM Modules...
  • Page 30 Upgrading RDRAM Memory NOTE RDRAM Terminator Module marked “CTRIMM” 2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XM600 models http://www.hp.com/go/pcaccessories Second RDRAM module, or RDRAM Continuity Module if unused First RDRAM module...

  • Page 31: Removing, Replacing And Upgrading Memory On Hp Kayak Xm600 Models Shipped With Rdram

    2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XM600 models Removing and Replacing an RDRAM Module completely...

  • Page 32: Memory Upgrades On The Hp Kayak Xu800

    2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XU800 models Removing, Replacing and Upgrading Memory on Kayak XU800 models IMPORTANT NOTE RDRAM Memory Expansion Card SDRAM Memory Expansion Card (must be replaced by RDRAM)
  • Page 33 2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XU800 models Replacing and Upgrading RDRAM Memory NOTE Removing and Replacing the Memory Expansion Card Removing the Memory Expansion Card...
  • Page 34 Replacing the Memory Expansion Card Removing and Replacing a Memory Module NOTE 2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XU800 models http://www.hp.com/go/pcaccessories...
  • Page 35 2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XU800 models NOTE Install a Memory Module: Replace a Memory Module:...

  • Page 36: Removing And Replacing A Pci Accessory Card

    24). Reconnect all cables and power cords. HP Kayak XM600 Upgrades The HP Kayak XM600 has five 32-bit 33 MHz, 5 V PCI accessory card slots and one Universal AGP PRO slot on the system board. HP Kayak XU800 Upgrades There are five PCI accessory card slots: •...
  • Page 37 33 MHz as well. A 32-bit card can be installed in a 64-bit slot without preventing other 64-bit PCI devices to operate in 64-bit mode. Universal AGP PRO slot (Kayak XM600 and Kayak XU800) Supported operation in the Universal AGP...

  • Page 38: Installing Mass Storage Devices

    2 Installing and Replacing Hardware Parts in Your PC Workstation Installing Mass Storage Devices Installing Mass Storage Devices The PC has an integrated Ultra ATA-66 controller that supports up to four IDE devices. Removable media IDE devices, such as CD-ROM drives, DVD drives, tape drives and Zip drives, require front access.
  • Page 39 Refer to the drive’s installation guide to check jumper settings or if there is IDE Hard Disk a special installation procedure to follow. HP Kayak XM600 Cables and Connectors Primary IDE cable supports two Hard Disk Drives Primary IDE Connector To identify the positions of other system board connectors, refer to the label located on the inside of the cover.
  • Page 40 2 Installing and Replacing Hardware Parts in Your PC Workstation Installing Mass Storage Devices HP Kayak XU800 Cables and Connectors Secondary IDE cable for access devices such as CD-ROM Drives, Zip Drives or Hard Disk Drives Primary IDE cable supports...
  • Page 41 Power Connectors for HP Kayak XM600 and XU800 PCs Additional Guide Rails Attached on the side of the front access cage (inside the PC Workstation), additional guide rails are available for mass storage device installations.

  • Page 42: Removing And Replacing The Primary Hard Disk Drive

    2 Installing and Replacing Hardware Parts in Your PC Workstation Removing and Replacing the Primary Hard Disk Drive Removing and Replacing the Primary Hard Disk Drive CAUTION Handle the hard disk drive with care. Avoid shocks and violent movement as this can cause damage to the hard disk drive’s internal components.
  • Page 43 CAUTION Configure the new hard disk drive with the same settings as the old one. Installing the Add the short blue guide rails to the new hard disk drive. Insert the guide New Drive rail labeled “L” on the left-hand side (cable connectors facing towards you and positioned at the bottom), and the guide rail “R”...

  • Page 44: Installing A Second Hard Disk Drive In An Internal Shelf

    2 Installing and Replacing Hardware Parts in Your PC Workstation Installing a Second Hard Disk Drive in an Internal Shelf Installing a Second Hard Disk Drive in an Internal Shelf The internal shelves can support two 3.5-inch devices. The master hard disk drive must be installed in the top shelf when using an IDE configuration.

  • Page 45: Installing An Accessory In The Front Access Cage

    Installing an Accessory in the Front Access Cage Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. Remove the PC Workstation’s cover and front upper bezel (refer to page 23 for instructions). Depending on the accessory to be installed, either: Remove the 5.25-inch metal filler plate.
  • Page 46 2 Installing and Replacing Hardware Parts in Your PC Workstation Installing an Accessory in the Front Access Cage Align the guide rails on both sides of the drive with the internal shelf guides and then slide the drive until it clicks into position. Connect the power and data cables to the installed device.

  • Page 47: Replacing The Cd-Rom Drive (Or Dvd-Drive)

    Replacing the CD-ROM Drive (or DVD-Drive) Removing the Switch off the display and PC Workstation. Disconnect all power cables Old Drive and any LAN or telecommunications cables. Remove the PC Workstation’s cover and front upper bezel (refer to page 23 for instructions). Disconnect the power and data cables from the old drive.

  • Page 48: Replacing The Floppy Disk Drive

    2 Installing and Replacing Hardware Parts in Your PC Workstation Replacing the Floppy Disk Drive Replacing the Floppy Disk Drive Removing the Switch off the display and PC Workstation. Disconnect all power cables Floppy Disk Drive and any LAN or telecommunications cables. Remove the PC Workstation’s cover and front upper bezel (refer to page 23 for these instructions).

  • Page 49: Completing The Installation Of A Mass Storage Device

    Verify or modify the configuration of your new SCSI hard disk drive. For more information on configuring a SCSI hard disk drive, refer to the SCSI Administrator’s Guide available on HP’s web site at http://www.hp.com/go/kayaksupport. When configuration is complete, exit the SCSI Configuration Utility and re-boot the computer to save any changes.

  • Page 50: Replacing The Power Supply Unit

    LAN or telecommunications cables. Remove the PC Workstation’s cover (refer to page 23 for instructions). Remove the HP UltraFlow Airflow Guide (refer to page 25). Remove all internal power supply connectors. Place your PC Workstation on its side with the system board facing upwards.
  • Page 51 Secure it in position using the three screws that you removed in steps 6 and 7. Reconnect all internal power supply connectors. Replace the HP UltraFlow Airflow Guide (refer to page 25). Return the PC Workstation to its upright position. Replace the PC Workstation’s cover (refer to page 24). Reconnect all the power and telecommunications cables.

  • Page 52: Replacing The System Board

    LAN or telecommunications cables. Remove the PC Workstation’s cover (refer to page 23 for instructions). Remove the HP UltraFlow Airflow Guide (refer to page 25 for instructions). To ease installation, place your PC Workstation on its side with the system board facing upwards.
  • Page 53 Expansion Card), processor and any accessory cards in the new system board (described in this chapter). Replace the HP UltraFlow Airflow Guide (refer to page 25). Replace the retaining bar and secure it in place with the retaining screw. Return the PC Workstation to its upright position.

  • Page 54: Replacing The Rear Fan

    LAN or telecommunications cables. Remove the PC Workstation’s cover (refer to page 23 for instructions). Remove the HP UltraFlow Airflow Guide (refer to page 25). From the rear of the PC, holding the rear fan with one hand, use a screwdriver with the other hand to gently push one of the two retaining clips (direction of the stamped arrows on the chassis) inwards.
  • Page 55 Gently push the rear fan towards the rear panel connectors, until it clicks into place. Replace the HP UltraFlow Airflow Guide (refer to page 25). Replace the PC Workstation’s cover (refer to page 24). Reconnect all the power and telecommunications cables.

  • Page 56: Replacing The Fan And Speaker Assembly

    2 Installing and Replacing Hardware Parts in Your PC Workstation Replacing the Fan and Speaker Assembly Replacing the Fan and Speaker Assembly Removing the Fan Switch off the display and PC Workstation. Disconnect all power cables and Speaker and any LAN or telecommunications cables. Assembly Remove the PC Workstation’s cover and front upper and lower bezels.
  • Page 57 Connect the fan and speaker cables to their connectors located on the system board. For HP Kayak XU800 PC Workstations, replace the Memory Expansion Card and secure it in place with the retaining screw. If required, refer to page 33 for instructions.

  • Page 58: System Board Switches

    2 Installing and Replacing Hardware Parts in Your PC Workstation System Board Switches System Board Switches HP Kayak XM600 PC Workstation There are ten system board switches used for configuration, numbered from 1 to 10. Of these a certain number are reserved and should not be modified, otherwise it could lead to a system failure.
  • Page 59 HP Kayak XU800 PC Workstation There are ten system board switches used for configuration, numbered from 1 to 10. Of these a certain number are reserved and should not be modified, otherwise it could lead to a system failure. NOTE...

  • Page 60: Replacing The Battery

    Please return used batteries to the shop from which you bought them, or to the dealer from whom you purchased your PC Workstation, or to HP, so that they can be either recycled or disposed of in an environmentally sound way.

  • Page 61: Troubleshooting Your Hp Pc Workstation

    What to do if you need more help. • What to do before contacting HP Support. For more detailed information, refer to the Troubleshooting Guide, available on HP’s web site at http://www.hp.com/go/kayaksupport/, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu.

  • Page 62: If Your Pc Does Not Start Properly

    The PC’s power cord is correctly connected. The Power-On Self Test Results In an Error on HP MaxiLife Status Panel An on-screen error message or a beep code when the PC starts up means there is a configuration problem with your PC.
  • Page 63 If the PC starts but you still have a problem... The Power-On Self Test Results In an Error on HP MaxiLife Status Panel For more information on the Setup program, refer to the Troubleshooting Guide, available on the HP web at: www.hp.com/go/kayaksupport.

  • Page 64: Using Hp Maxilife To Diagnose Problems

    3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems Using HP MaxiLife to Diagnose Problems Your HP LCD can help you to diagnose problems with your PC Workstation, even when you are unable to get your system and monitor working properly.
  • Page 65 Further information about RDRAM and SDRAM modules can be found on page 28 for the HP Kayak XM600 and page 32 for HP Kayak XU800 models. 3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems...

  • Page 66: Other Features

    3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems POST Phase Following these checks, the POST (Power-On Self Test) sequence is initiated. One of the following screens will appear in this phase: HP Kayak XM600 INFO Other Features HP MaxiLife Services includes: •...
  • Page 67 Serial Number HP Kayak XU800 POST Code xx No errors were detected. COMPONENT Next 3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems • Type & speed of processor • Number and capacity of memory modules installed...
  • Page 68 3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems If an error is detected, an error screen appears indicating the problem. To continue viewing the test results of the other system components, press the control button. When the diagnostic tests are complete, one of the following screens is displayed.

  • Page 69: Hp Diagtools Hardware Diagnostics Utility

    HP DiagTools Hardware Diagnostics Utility HP DiagTools is an accurate and reliable utility that helps you diagnose any potential hardware-related problems. With this utility you can: • Check the hardware configuration and verify that it is functioning correctly. • Test individual hardware components.
  • Page 70 Support Ticket results, you will need to create a Support Ticket If you are using HP DiagTools from the hard disk drive, a floppy disk drive is required to store the Support Ticket file. In the case where you are using HP DiagTools from a CD-ROM, you can create the Support Ticket file on either the hard disk drive or floppy disk drive.

  • Page 71: Image Creation And Recovery Cd-Rom

    Copy OS Master Files: For use when Windows prompts you to insert the operating system media when installing additional drivers. • HP DiagTools: Checks the system configuration and operation. Also described on page 69. Requirements Before performing a recovery, upgrade or downgrade, it is advisable that you make a checklist for each type of function.
  • Page 72 3 Troubleshooting Your HP PC Workstation Image Creation and Recovery CD-ROM Performing a The PC model must match the CD-ROM, which contains a BIOS lock. Recovery, Upgrade Save (if possible) data files and software applications. or Downgrade It is recommended upgrading to the latest BIOS version.
  • Page 73 Explorer to browse through the driver directories. To install a driver, follow the driver’s instructions given in the Readme file. NOTE For HP Kayak XU800 FastRaid models, refer to the HTML file on the Image Creation and Recovery CD-ROM in order to complete the FastRaid recovery.

  • Page 74: Frequently Asked Questions

    Q: How do I disable the integrated sound features on my PC if I install an add-on sound card (on Windows NT, Windows 95 and Windows 98)? A: Use the HP Setup program to disable the Audio item in the Advanced menu.

  • Page 75: Need More Help

    Need More Help? Refer to the Troubleshooting Guide for more detailed help. This manual is available from HP’s web site at: www.hp.com/go/kayaksupport, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu. Some Troubleshooting Tips: •...

  • Page 76: Collecting Information Before Contacting Hp Support

    See label on the right side of your PC. See label on the right side of your PC. • There may be some compatibility problems with non-HP RAM. The amount of RAM is displayed in the Setup program main menu, accessed by pressing F2 during start-up. •...

  • Page 77: Working In Comfort

    Thank you for selecting HP computing equipment. To optimize your comfort and productivity, it is important that you set up your work area correctly and use your HP equipment properly. With that in mind, we have developed some set-up and use recommendations for you to follow based on established ergonomic principles.
  • Page 78 Typically, the earlier a problem is diagnosed and treated, discomfort? the easier it is to resolve. Preparing Your When using HP computing equipment, it is important that your work environment contributes to your comfort and productivity. Work Environment Your Chair...
  • Page 79 • A curved seat edge. The front of the seat should be curved and finished in a “waterfall” edge. • An adjustable back support in both height and forward and backward tilt. It is important that the backrest correctly supports the lower part, or lumbar curve, of the back.
  • Page 80 Overall - Change your position frequently and take regular breaks to avoid fatigue. Setting Up Your Make sure that all the elements of your HP computer system—monitor, document holder, keyboard, mice and other input devices, and HP Computing headphones and speakers—are optimally arranged and adjusted to meet Equipment your personal requirements.
  • Page 81 • Maintain a comfortable viewing distance to the screen. Most people prefer a viewing distance of approximately 46 to 76 cm (18 to 30 inches), depending on monitor size. Character size and the amount of space available on the work surface can affect this distance. •...
  • Page 82 • Because HP keyboards vary in depth, you'll want to be sure that your work surface or keyboard tray has sufficient room to accommodate your model. The keyboard tray should be wide enough to hold both the keyboard and mouse or trackball: 66 to 71 cm (26 to 28 inches).
  • Page 83 • When using your HP keyboard, remember it takes very little pressure or force from your fingers to activate the keys. Improper typing style— the use of too much force—can place unnecessary stress on the tendons and muscles in your hands, wrists, and forearms.
  • Page 84 Listening to loud sounds for prolonged periods may permanently damage your hearing. To avoid discomfort from unexpected noise, always turn Speakers down the volume before connecting headphones or speakers to your HP equipment. When you put on the headphones, slowly increase the volume until you find a comfortable listening level, then leave the volume control in that position.
  • Page 85 Comfort and These recommendations are drawn from the latest available international ergonomic standards and recommendations, including ISO 9241 and Safety Checklist ANSI/HFS 100-1988. General • Work Surface Height - Adjust either your seat height, work surface or both, to position the work surface at approximately elbow height. •...
  • Page 86 Seek additional information from the sources available to you, including your employer, doctor, local office supply store, and the Information Sources listed in the online version of Working in Comfort, preloaded on the hard disk of your HP computing equipment. English...

  • Page 87: Regulatory Information

    38053 Grenoble Cedex 09 FRANCE Declares that the product: Product Name:Personal Computer Workstation Model Number:HP Kayak XM600 and HP Kayak XU800 Conforms to the following Product Specifications: SAFETY International: IEC 60950: 1991+A1+A2+A3 +A4 Europe: EN 60950: 1992+A1+A2+A3 +A4 China: GB 4943-1995...
  • Page 88 Consult your dealer or an experienced radio/TV technician for help. Hewlett-Packard's FCC Compliance Tests were conducted using HP-supported peripheral devices and HP shielded cables, such as those you receive with your system. Changes or modifications not expressly approved by Hewlett-Packard could void the user's authority to operate the equipment.
  • Page 89 PC, or to HP so they can either be recycled or disposed of in the correct way. Returned batteries will be accepted free of charge.
  • Page 90 HP can also take your old PC back for recycling when it reaches the end of its useful life. HP has a product take-back program in several countries. The collected equipment is sent to one of HP’s recycling facilities in Europe or the USA.

  • Page 91: Hp Software Product License Agreement And Software Product Limited Warranty

    ROM: (i) The product recovery CD-ROM and/or support utility software may only be used for restoring the hard disk of the HP computer with which the product recovery CD-ROM was originally provided.(ii) The use of any operating system software by Microsoft contained in any such product recovery CD-ROM shall be governed by the Microsoft End User License Agreement (EULA).
  • Page 92 HP software against defects in material and workmanship that may result in the failure of HP software to execute when the HP product and HP software are used properly. Except as expressly provided above, HP does not warrant that any HP software will operate uninterrupted or error-free.
  • Page 93 Obtaining Warranty Service. Warranty service may be obtained from the nearest HP sales office or other location indicated in the owner’s manual or service booklet. FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY BUT ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.

  • Page 95: Index

    69 requirements before using, 69 starting, 70 HP DualExpress! using, 27 HP Image Creation and Recovery CD-ROM, 61 HP Kayak XM600 removing and replacing RDRAM module, 31 removing and replacing SDRAM module, 28 upgrading RDRAM memory, 31 HP Kayak XU800...
  • Page 96 HP Kayak XU800, 35 replacing on HP Kayak XU800, 35 Memory Expansion Card removing and replacing on HP Kayak XM600, 29 reserved memory socket, 28 memory expansion card memory upgrades for HP Kayak XU800, 32 memory upgrades...
  • Page 97 36 airflow guide, 25 cover, 23 front bezel, 23 HP Kayak XU800 memory extension card, 33 memory extension card on HP Kayak XM600, 29 primary hard disk drive, 42 processor, 26 removing and replacing the cover important warning, 6...
  • Page 98 Index HP DualExpress!, 27 power management, 20 warranty HP Software Product License Agreement, 91 working in comfort also consult preloaded version, 77 recommendations, 77 Year 2000 compliancy, 74...

This manual is also suitable for:

Kayak xu800Xm600 - kayak - 128 mb ram

Table of Contents