Quick Start Guide
Model: DL8725
Please follow the instructions inside to get started with ActiveLink
1. Install the ActiveLink Software
Visit
www.getactivelink.com/download
2. Connect your Activity Monitor
After the installation is complete, you'll be asked to connect your Activity Monitor to your computer. To do
so, use the USB cable provided: Insert the micro USB into the Activity Monitor and the other end into the
USB port on your computer. Within a minute, you'll see your monitor's lights lighting up.
Note: Please keep the Activity Monitor connected until the battery is completely charged. During charging
you'll see amber lights indicating the battery status; the lights turn green when the battery is fully charged.
Unplug the Activity Monitor from the USB cable, reinsert it and try a different USB port of your computer.
3. Log In and Subscribe
Once you connect your Activity Monitor, a screen will open for you to log in.
Log in and follow the steps to get started!
Note: During the log-in process, you will be asked to purchase a monthly ActiveLink subscription.
ActiveLink will only work while you have both a current ActiveLink subscription and current Weight
Watchers Online or eTools subscription. Your ActiveLink subscription automatically renews each month
(for a maximum of xx months) at the current monthly rate until you cancel.
© 2014 Weight Watchers International, Inc. © 2014 Koninklijke Philips N.V. All rights reserved. WEIGHT WATCHERS
and PointsPlus® are registered trademarks of Weight Watchers International, Inc. ActiveLink is a registered trademark of
Weight Watchers International, Inc. PHILIPS is a registered trademark of Koninklijke Philips N.V.
Need Help? Visit www.getactivelink.com/help
For Warranty Information, visit www.getactivelink.com/warranty
to download and install the software.