Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 36

Stacker/stapler and integrated punch unit
Finishing options
#
•
Do not place your fingers or hands on the finisher when the finisher is in use.
Doing so may result in personal injury or damage to the finisher.
• When removing paper from the tray of the finisher, do not place your hands
on the output tray of the finisher. The tray may move upward and your hands
may get caught.
•
Do not place anything other than output paper in the trays of the finisher,
as doing so may damage the trays.
• Do not place anything under the trays of the finisher, as doing so may damage
the trays.
•
The finishing options cannot be set for paper less than 60g/m
Do not select the finishing options.
#
NOTE
If the finishing is used, the output trays move downward as the stack of paper that is
output increases in quantity and thickness. Once an output tray has reached its
stacking limit, subsequent prints are automatically delivered to the next available tray.
If all of the available trays have reached their stacking limits, printing stops temporar-
ily. Remove all of the output paper from the trays. The trays move upward and
printing resumes.
36 Chapter 2 - Main parts
CAUTION
2
/ 16 lb bond.