Selecting An Input Signal Type (Analog Pc); Selecting An Input Signal Type (Component) - Canon REALiS WUX4000 User Manual

Setting Display Status
Selecting an Input Signal
Type (Analog PC)
[Input signal select]
HDMI
Digital PC
You can select a suitable resolution if auto
PC adjustment function (P51) cannot
project the correct image from a computer.
Input signal select
Press the OK button to accept your setting
and then press the MENU button.
Select an input signal corresponding to
the resolution of the computer.
• For the signal types supported by the pro-
jector, see the table on page 175.
Selecting an Input Signal
Type (Component)
[Input signal select]
Component
Analog PC
You can select the proper component sig-
nal type if the video image from AV equip-
ment is not projected correctly.
Display settings
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• Refer to the manual for the AV equipment
78
HDMI
Digital PC
Input signal select
connected to the projector to confirm the
component signal type.
Component
Analog PC
Display settings