The following information is displayed.
Projector name
Location
MAC address
IP address
Power Status
Lamp Time Normal Mode
Lamp Time Quiet Mode
Lamp Time Converted
Filter Time
Alert
To operate the projector from the computer, click [Projector control] (P153).
4
To configure, click [Settings].
The settings window appears.
Configuring the Network From the Computer
The name of the projector on the network
The location of projector installation
The MAC address of the projector
The IP address of the projector
The power status of the projector
Lamp operating time in [Normal] lamp mode
Lamp operating time in [Quiet] lamp mode
Lamp operating time (converted value)
Filter operating time
Error message (if an error has occurred)
Temperature abnormality
Faulty lamp
Faulty lamp cover
Faulty cooling fan
Faulty power supply
Faulty lens connector: Lens connector error
Faulty air filter unit: Filter error
Unknown error
143