Table of Contents
Advertisement
PHILIPS 4000 and 3000
When the BU reaches the work position the indication WORK
changes from "N" to "Y", the number of the current is less than
200mA (without BU) or 300mA (with BU).
ERROR: The indication WORK doesn't change and remain "N", the
display backlight changes from green to red; Check the work
microswitch (broken?), the BU motor (blocked?) and the wiring
(JP16).
ERROR: (Without BU) The absorbed current is more than
200mA, the display backlight changes from green to red; check the
BU and the motor.
ERROR: (With BU) The absorbed current is more than 300mA,
the display backlight changes from green to red; check the BU and
the motor.
Press the Z3 button to move the BU to Home
When the BU reaches the home position the indication HOME
changes from "N" to "Y", the number of the current is minus than
200mA (without BU) or 300mA (with BU).
ERROR: The indication HOME doesn't change and remain "N", the
display backlight changes from green to red; Check the work
microswitch (is broken), the BU motor (is blocked) and the wiring
(JP16).
ERROR: (Without BU) The absorbed current is higher than
200mA, the display backlight changes from green to red; check the
BU and the motor.
ERROR: (With BU)The absorbed current is higher than 300mA, the
display backlight changes from green to red; check the BU and the
motor
Press Z7 "
" to move to the next screen
05 SERVICE MODE
5/18
Advertisement
Table of Contents
