Sony VPL-VW290ES Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projector
  5. VPL-VW290ES
  6. Operating instructions manual

Sony VPL-VW290ES Operating Instructions Manual

Hide thumbs Also See for VPL-VW290ES:
Table of Contents

Advertisement

Quick Links

Download this manual
5-031-134-11 (1)
Video Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick
Reference Manual thoroughly and retain them for future reference.
VPL-VW290ES
VPL-VW325ES

Advertisement

Table of Contents
loading

Related Manuals for Sony VPL-VW290ES

Summary of Contents for Sony VPL-VW290ES

  • Page 1 5-031-134-11 (1) Video Projector Operating Instructions Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain them for future reference. VPL-VW290ES VPL-VW325ES...

  • Page 2: Table Of Contents

    Table of Contents Location of Controls Using Network Features Front/Right Side ........ 3 Displaying the Control Window of the Unit with a Web Browser ..... 39 Rear/Left Side/Bottom ...... 4 Operating the Control Window ..40 Remote Control ......... 5 Switching the Page .....

  • Page 3: Location Of Controls

    Location of Controls Front/Right Side Warning indicators Warning indicators Others a ON/STANDBY indicator i Lamp cover (page 48) (page 45) j Ventilation holes (exhaust) b WARNING indicator (page 45) k Ventilation holes (intake) (page 50) Connectors l Remote control detector c LAN connector (page 39) (page 7) d HDMI 1/HDMI 2 connector...

  • Page 4: Rear/Left Side/Bottom

    Rear/Left Side/Bottom The buttons on the control panel have the same names as those on the remote control. Control panel Control panel Others a ?/1 (ON/STANDBY) button f Remote control detector (page 7) (page 7) b INPUT button (page 13) g Ventilation holes (intake) (page 50) c MENU button (page 20)

  • Page 5: Remote Control

    a LIGHT button Remote Control Illuminates the buttons on the remote control. b Infrared transmitter c ?/1 (ON/STANDBY) button (page 7) d INPUT button (page 13) e CALIBRATED PRESET buttons (page 19) f PATTERN button (page 8) g RESET button (page 21) h M/m/</, (arrow)/ (enter) buttons (page 20)

  • Page 6: Connections And Preparations

    Connections and Preparations Note Installing the Unit When using a screen with an uneven surface, stripes pattern may rarely appear on the screen The installation distance between the unit depending on the distance between the screen and a screen varies depending on the size of and the unit or the zooming magnifications.

  • Page 7: Adjusting The Picture Position

    Note Adjusting the Picture Depending on the installation location of the Position unit, you may not be able to control it with the remote control. In this case, point the remote control at the remote control detector of the Project an image on the screen and then unit or the screen.
  • Page 8 Adjust the focus. Adjust the picture size. Press the PATTERN button repeatedly to Press the PATTERN button repeatedly to display the Lens Focus adjustment display the Lens Zoom adjustment window (test pattern). Then adjust the window (test pattern). Then adjust the focus of the picture by pressing the M/m/ size of the picture by pressing the M/m/ </, buttons.
  • Page 9 To adjust the horizontal position To adjust the vertical position Press </,. Press M/m. The picture projected on the screen moves The picture projected on the screen moves right or left by a maximum of 31% of the up by a maximum of 85% or moves down by screen width from the center of the lens.
  • Page 10 Range of movement of the projected Lens adjustment window (test picture pattern) 1.78:1 (16:9) 0.85V 1.33:1 (4:3) 0.31H 0.31H Projected Picture 2.35:1 0.8V H: Width of the projected picture V: Height of the projected picture 1.85:1 The dashed lines show the screen sizes of each aspect ratio.

  • Page 11: Connecting To Video Equipment Or A Computer

    Connecting to Video Equipment or a Computer You can enjoy high picture quality by connecting a DVD player/recorder, Blu-ray Disc player/ ® recorder, or PlayStation equipped with HDMI output to the HDMI input of the unit. When making connections, be sure to do the following: •...
  • Page 12 Notes • Use a Premium High Speed HDMI cable. If you use other types of cables, 4K video may not be displayed appropriately. • When connecting an HDMI cable to the unit, make sure the mark on the upper part of the HDMI input of the unit and the v mark on the connector of the cable is set at the same position.

  • Page 13: Projecting

    Projecting The fan stops and the ON/STANDBY Projecting the indicator changes from flashing green to remaining red. Picture The power is turned off completely, and you can disconnect the AC power cord. Turn on both the unit and the equipment connected to the unit. Note Never disconnect the AC power cord while the Press INPUT to display the input...

  • Page 14: Watching 3D Video Images

    Adjusting/Setting the 3D functions Watching 3D Video You can adjust/set the 3D functions by Images pressing the 3D button on the remote control or with the “3D Settings” of the Function menu. For details, see “3D Settings” You can enjoy powerful 3D video images, (page 32).
  • Page 15 Top or side view Projector 10 m 10 m 10 m 10 m...

  • Page 16: Selecting The Aspect Ratio According To The Video Signal

    Selecting the Aspect Ratio According to the Video Signal You can select an aspect ratio best suited for the video signal received. Press ASPECT. ASPECT Each time you press the button, you can button select the “Aspect” setting.You can also select it using the menu (page 28).
  • Page 17 Original image Recommended setting and resultant images Normal 1.78:1 (16:9) 1.33:1 (4:3) 1.33:1 (4:3) with side panels V Stretch 2.35:1 When using an anamorphic lens Squeeze 16:9 When using an anamorphic lens...
  • Page 18 Original image Recommended setting and resultant images Stretch Squeezed Notes • Selectable aspect modes vary depending on the input signal (page 58). • The aspect modes cannot be selected when a computer signal is input. Notes on switching the “Aspect” setting •...

  • Page 19: Selecting The Picture Viewing Mode

    Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of video source or room conditions. You can save and use different preset modes for 2D/3D/HDR respectively. CALIBRATED Press one of the CALIBRATED PRESET PRESET buttons buttons.

  • Page 20: Using The Menus

    Using the Menus Note The menu displays used for the explanation may be different from the actual menu display. Press M/m to select an item you want Operation through to set or adjust and press , or The setting items are displayed in a pop- the Menus up menu, in a setting menu, in an adjustment menu or in the next menu...
  • Page 21 Next menu window To reset the items that have been adjusted Setting items Select an item in the menu screen, and display the pop-up menu, the setting menu, or the adjustment menu. Press RESET on the remote control to reset only the selected settings to its factory preset value.

  • Page 22: Picture Menu

    Picture Menu The Picture menu is used for adjusting the picture. Note These items may not be adjustable or configurable, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (page 55). Item names in brackets represent those printed on the remote control. Setting items Description Calib.
  • Page 23 Database: Select “Normal” or “Mastered in 4K.” “Mastered in 4K” provides image quality suitable for Blu-ray Disc™ “Mastered in 4K” releasing from Sony Pictures Home Entertainment. Resolution: When you increase the setting value, the texture and detail of the picture become sharper.
  • Page 24 Setting items Description Contrast Adjusts the contrast. [CONTRAST] Higher values increase the sharpness in images, while lower values decrease the sharpness. You can make adjustments by pressing the CONTRAST +/- on the remote control. “Contrast(HDR)” appears instead of “Contrast” for the following cases: - When the HDR signal is input with “Auto”...
  • Page 25 Setting items Description Expert Setting NR (Noise Reduces the roughness or noise of the picture. Reduction) Auto: Detects the noise level to reduce the roughness or noise of the picture automatically. High/Middle/Low: Select a setting according to the roughness or noise of the input signal source.
  • Page 26 Setting items Description Color Correction On: Adjusts Hue, Saturation or Brightness of the selected colors. [COLOR Repeat steps 1 and 2 described below to specify the target color. CORRECTION] 1 Press M/m to select “Color Select,” then press </, to select the color you want to adjust among “Red,”...
  • Page 27 Setting items Description Color Space Converts the color space. [COLOR SPACE] BT.709: An ITU-R BT.709 color space, which is used for high- definition television broadcast or Blu-ray Disc. The color space is equivalent to sRGB. BT.2020: The color space is wider than BT.709. Use this setting when playing back HDR content.

  • Page 28: Screen Menu

    Screen Menu You can set the picture size, aspect mode, etc. Note These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (page 55). Item names in brackets represent those printed on the remote control. Setting items Description Aspect...
  • Page 29 Setting items Description Tips • When you select “V Stretch” or “Squeeze,” select the anamorphic lens type from “Anamorphic Lens” in the Installation menu. • Selectable aspect modes vary depending on the input signal (page 58). • The aspect cannot be selected for an input signal from a computer, or an input signal with a resolution of 4096 ×...

  • Page 30: Setup Menu

    • To turn on the power with the Remote Start function, a special command should be sent from a PC or a terminal. For details, consult with qualified Sony personnel. Note When Remote Start is set to “On,” the standby power requirement will increase.
  • Page 31 Setting items Description Network Management On: Set when connected to the network and continuously communicating with the projector control equipment. Note When Network Management is set to “On,” the network function is continuously enabled. Set Network Management to “Off” when the unit is not continuously connected to the network.

  • Page 32: Function Menu

    Function Menu The Function menu is used for changing the settings of the various functions of the unit. Setting items Description 3D Settings You can change the settings of the 3D function. 2D-3D Display For Switching the video images to “2D” or “3D.” Sel.

  • Page 33: Lock

    Setting items Description 3D Depth Adjust For adjusting the depth of the 3D video images on the screen. The setting can be made only when a 3D Format other than “Simulated 3D” is selected. Depth Front Normal Depth We recommend that “3D Depth Adjust” be set to “0.” The 3D video images may be difficult to perceive, depending on the setting of “3D Depth Adjust.”...
  • Page 34 Items Locked by Settings Lock Group 1 Group 2 Picture menu Setup menu Reset Status Reality Creation Language Dynamic HDR Enhancer Menu Position Lamp Control High Altitude Mode Motionflow Remote Start Contrast Network Management Brightness Power Saving Color Lamp Setting Function menu Color Temp.

  • Page 35: Installation Menu

    Installation Menu The Installation menu is used for changing the installation settings. Setting items Description Image Flip Flips the picture on the screen horizontally and/or vertically. HV: Flips the picture horizontally and vertically. H: Flips the picture horizontally. V: Flips the picture vertically. Off: The picture does not flip.
  • Page 36 Setting items Description Panel Alignment This feature allows you to adjust the gaps in the color of characters or the picture on the screen. Adjust: Adjusts the gaps in the colors selecting “Adjust Color” or “Adjust Item.” Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments.
  • Page 37 Setting items Description Network Setting Perform internet protocol settings. IPv4 Setting IP Address Setup: Selects the IP address setting method. Auto (DHCP): The IP address is assigned automatically from the DHCP server such as a router. Manual: Specifies the IP address manually. When “Manual”...

  • Page 38: Information Menu

    Information Menu The Information menu displays the model name, serial number, input signal type/format, software version and the cumulated hours of usage of the lamp. Signal type Items Description Model Name Displays the model name Serial No. Displays the serial number. Signal type Displays the resolution of the input signal which you are selecting.

  • Page 39: Using Network Features

    Using Network Features Connection to the network allows you to Displaying the operate the following features. Use the projector with only necessary Control Window of functions enabled. the Unit with a Web • Checking the current status of the unit via a Web browser.

  • Page 40: Operating The Control Window

    Operating the Control Window Switching the Page Click one of the Page Switching buttons to display the desired setting page. Once you make the network settings, you can open the Control window only by performing step 3 of this procedure. Page Switching buttons Setting the Access Limitation You can limit a user for accessing any...

  • Page 41: Confirming The Information Regarding The Unit

    Alphabet is case-sensitive. The default password “Projector” cannot be set as a new password. Note If you forget your password, consult with qualified Sony personnel. The password will be reset with your permission. Confirming the Information Regarding the Unit You can confirm the current settings for the unit on the Information page.

  • Page 42: Error Handling

    Error Handling Troubleshooting If the unit appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy Page The power is not turned The power may not turn on if you turn the power off with ?/ –...
  • Page 43 The model name does not The display mode of the unit may be set at the time of – disappear from the purchase. Consult with your local dealer or qualified Sony screen. personnel. Remote control Symptom Cause and Remedy...
  • Page 44 3D video images Symptom Cause and Remedy Page The video image does not Check if the 3D glasses are turned on. seem like 3D video Make sure that the battery in the 3D glasses could be weak – images. or is sufficiently charged. Set “2D-3D Display Sel.”...

  • Page 45: Warning Indicators

    Both indicators flash Note If the symptom persists even after carrying out the above methods, consult with qualified Sony personnel. If the indicator starts flashing in a way of other than the above, turn off, and then turn on the power with the [/1 (On/Standby) button on the remote control or control panel of the unit.

  • Page 46: Message Lists

    Message Lists Warning messages Symptom Cause and Remedy Page High temp.! Lamp off in Turn off the power. – 1 min. Check to ensure that nothing is blocking the ventilation 3, 4 holes. Frequency is out of Frequency is out of range. Input a signal that is within the range! acceptable frequency range of the unit.

  • Page 47: Others

    3D video images by converting Download the update files from the to the simulated 3D may constitute an following Sony website: infringement of the rights of authors or https://www.pro.sony.eu/ producers, which are legally protected. The website also explains how to install the update.

  • Page 48: Replacing The Lamp

    • Be sure to turn off the unit and unplug the Replacing the Lamp power cord before replacing the lamp, then check the ON/STANDBY indicator has already been turned off. The lamp used for the light source has a certain lifespan. When the lamp dims, the Turn off the unit and unplug the AC color balance of the picture becomes power cord.
  • Page 49 Push in the new lamp by the handle securely until it reaches the end, and then tighten the 3 screws. Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. Note Be careful not to touch the optical block inside the unit.
  • Page 50 Wipe dust off the ventilation holes • The unit will not turn on unless the lamp cover are securely closed. (intake) with a soft cloth. • To clear a message displayed on the screen, press any button either on the remote control or the control panel of the unit once.

  • Page 51: Cleaning

    Trademark Information • “PlayStation” is a registered trademark of Sony Interactive Entertainment Inc. • The terms HDMI and HDMI High- Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

  • Page 52: Specifications

    Specifications Item Description Display system SXRD panel, projection system Display device Size of effective 0.74-inch (18.8 mm) SXRD display area Number of pixels 26,542,080 pixels (8,847,360 pixels × 3) Projection lens 2.06 times zoom lens (motorized) f = 21.7 mm to 44.7 mm F3.0 to F4.0 Light source Ultra High Pressure Lamp 225 W type...

  • Page 53: Preset Signals

    • The values for mass and dimensions are approximate. • Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. • Information on accessories in this manual is current as of April 2021.
  • Page 54 Preset Preset signal (resolution) fH (kHz) fV (Hz) Sync memory no. 1920 × 1080/50i 1080/50i 56.250 50.000 – (Frame packing) (1920 × 1080i) 3840 × 2160/60p 3840×2160/60p 135.000 60.000 – (3840 × 2160) 3840 × 2160/50p 3840 × 2160/50p 112.500 50.000 –...

  • Page 55: Input Signals And Adjustable/Setting Items

    Input Signals and Adjustable/Setting Items The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted/set are not displayed in the menu. Picture menu Input signal Item Component signal Video GBR signal...

  • Page 56: Compatible 3D Signals

    Screen menu Input signal Item Component signal Video GBR signal Computer signal Aspect* – : Adjustable/can be set –: Not adjustable/cannot be set *1: For further details, refer to the tables in “Aspect Mode” (page 58). Note When connecting a cable such as an HDMI cable, etc., check the type of the signal in the Information menu (page 38) and “Digital signal”...
  • Page 57 3D signals Item 720/60p, 1080/60i, 1080/24p 1080/60p, 720/50p 1080/50i 1080/50p x.v.Color – – – – Aspect* : Adjustable/can be set –: Not adjustable/cannot be set *1: For further details, refer to the tables in “Aspect Mode” (page 58). When the unit is set to convert 2D video images to 3D video images, some items on the menus may be not available to adjust/set, depending on the “3D Format”...

  • Page 58: Aspect Mode

    Aspect Mode Selectable items vary depending on the type of input signal or 3D format. For details, see the tables below. Items that cannot be selected are not displayed in the menu. 1920 × 1080 720 × 480 Acceptable signals 4096 ×...

  • Page 59: Motionflow

    Motionflow Selectable items vary depending on the type of input signal or 3D format. For details, see the tables below. Items that cannot be selected are not displayed in the menu. 1920 × 1080 1280 × 720 Acceptable signals 3840 × 2160 4096 ×...
  • Page 60 Picture menu Item Storage conditions Calib. Preset For each input connector and 2D/3D/HDR Reset For each input connector, 2D/3D, HDR/SDR , and Calib. Preset Reality Creation Dynamic HDR Enhancer Lamp Control Motionflow Contrast Brightness Color Color Temp. D93-D55 Custom 1-5 Gain R For each Color Temp., D93-D55 and Custom 1-5 Gain G...

  • Page 61: Projection Distance And Lens Shift Range

    Projection Distance and Lens Shift Range The projection distance refers to the distance between the front of the lens and the projected surface. Projection distance L Front of the lens Projected image The lens shift range represents the distance in percent (%) by which the lens can be shifted from the center of the projected image.
  • Page 62 When projecting in 1.90:1 (Native Full Display 17:9) format 1.90 Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height 80" (2.03 m) 1.80 × 0.95 (71 × 37) 2.32 – 4.77 (91 – 187) 100"...
  • Page 63 When projecting in 1.78:1 (16:9) format 1.78 Video display area Projection area Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height 80" (2.03 m) 1.77 × 1.00 (70 × 39) 2.44 – 5.01 (96 – 197) 100"...
  • Page 64 When projecting in 2.35:1 format 2.35 Video display area Projection area Projection distance Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height 80" (2.03 m) 1.87 × 0.80 (74 × 31) 2.41 – 4.96 (95 – 195) 100"...

  • Page 65: Dimensions

    Dimensions Front Unit: mm (inches) 495.6 (19 247.8 (9 247.8 (9 Center of the lens Bottom Unit: mm (inches) Front of the cabinet 87.4 (3 142.9 (5 150.6 (5 409.3 (16 7.5 ( 463.6 (18...
  • Page 66 The distance between the front of the lens and the front of the cabinet Unit: mm (inches) 36.8 (1 Front of the lens Front of the cabinet Attaching the PSS-H10 projector suspension support Front view Unit: mm (inches) 150 (5 Ceiling Center of the The bottom...
  • Page 67 Side view Unit: mm (inches) 213.4 (8 130 (5 Front of the cabinet 258.4 (10 463.6 (18 Top view Unit: mm (inches) 213.4 (8 130 (5 45 (1 Front of the cabinet Upper ceiling mount bracket Center of the supporting pole (The center of the supporting pole is different from that of the unit.)
  • Page 68 Holes for the ceiling mount Use the screws with a length of 5.3 mm ( inches, minimum) to 7.6 mm ( inches, maximum) for the ceiling mount. Recommended tightening torque (tension when turning a screw towards the direction of rotation): 1.4 ± 0.2 N-m The minimum length of screw Insert nut (M5)

  • Page 69: Notices And Licences For Software Used In This Product

    Finally, any free program is threatened constantly by =============================== software patents. We wish to avoid the danger that...
  • Page 70 “modification”.) Each licensee is addressed as “you”. and every part regardless of who wrote it. Activities other than copying, distribution and Thus, it is not the intent of this section to claim rights modification are not covered by this License; they are or contest your rights to work written entirely by you;...
  • Page 71 8. If the distribution and/or use of the Program is License. However, parties who have received copies, or rights, restricted in certain countries either by patents or by from you under this License will not have their copyrighted interfaces, the original copyright holder licenses terminated so long as such parties remain in who places the Program under this License may add full compliance.
  • Page 72 DAMAGES, INCLUDING ANY GENERAL, items--whatever suits your program. SPECIAL, INCIDENTAL OR CONSEQUENTIAL You should also get your employer (if you work as a DAMAGES ARISING OUT OF THE USE OR programmer) or your school, if any, to sign a INABILITY TO USE THE PROGRAM “copyright disclaimer”...
  • Page 73 that forbid distributors to deny you these rights or to special need to encourage the widest possible use of a ask you to surrender these rights. These restrictions certain library, so that it becomes a de-facto standard. translate to certain responsibilities for you if you To achieve this, non-free programs must be allowed distribute copies of the library or if you modify it.
  • Page 74 modification are not covered by this License; they are and every part regardless of who wrote it. outside its scope. The act of running a program using Thus, it is not the intent of this section to claim rights the Library is not restricted, and output from such a or contest your rights to work written entirely by you;...
  • Page 75 Library even though the source code is not. Whether specified in Subsection 6a, above, for a charge no this is true is especially significant if the work can be more than the cost of performing this distribution. d) If distribution of the work is made by offering linked without the Library, or if the work is itself a library.
  • Page 76 Library or works based on it. differ in detail to address new problems or concerns. 10. Each time you redistribute the Library (or any Each version is given a distinguishing version work based on the Library), the recipient number. automatically receives a license from the original If the Library specifies a version number of this licensor to copy, distribute, link with or modify the License which applies to it and “any later version”,...
  • Page 77 END OF TERMS AND CONDITIONS other materials provided with the distribution. How to Apply These Terms to Your New 3. All advertising materials mentioning features or Libraries use of this software must display the following acknowledgement: If you develop a new library, and you want it to be of 4.
  • Page 78 INDEPENDENT JPEG GROUP MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN SOFTWARE NO EVENT SHALL THE OpenSSL PROJECT OR This software is based in part on the work of the ITS CONTRIBUTORS BE LIABLE FOR ANY Independent JPEG Group. DIRECT, INDIRECT, INCIDENTAL, SPECIAL, =============================== EXEMPLARY, OR CONSEQUENTIAL...
  • Page 79 use of this software must display the following person obtaining a copy of this software and acknowledgement: “This product includes associated documentation files (the “Software”), to cryptographic software written by Eric Young deal in the Software without restriction, including (eay@cryptsoft.com)” The word ‘cryptographic’ can without limitation the rights to use, copy, modify, be left out if the rouines from the library being used merge, publish, distribute, sublicense, and/or sell...
  • Page 80 klibc and jemalloc electronic form in the second BSD Networking Software Release, from IEEE Std 1003.1-1988, IEEE All of the documentation and software included in the Standard Portable Operating System Interface for 4.4BSD and 4.4BSD-Lite Releases is copyrighted by Computer Environments (POSIX), copyright C 1988 The Regents of the University of California.
  • Page 81 RIGHTS. IN NO EVENT SHALL THE Copyright (c) 2007-2010 Niels Provos and Nick COPYRIGHT HOLDER OR HOLDERS Mathewson INCLUDED IN THIS NOTICE BE LIABLE FOR Redistribution and use in source and binary forms, ANY CLAIM, OR ANY SPECIAL INDIRECT OR with or without modification, are permitted provided CONSEQUENTIAL DAMAGES, OR ANY that the following conditions are met:...
  • Page 82 <maxim.yegorushkin@gmail.com> OTHERWISE, ARISING FROM, OUT OF OR IN ============== CONNECTION WITH THE SOFTWARE OR THE The arc4module is available under the following, USE OR OTHER DEALINGS IN THE sometimes called the “OpenBSD” license: SOFTWARE. Copyright (c) 1996, David Mazieres <dm@uun.org> =============================== Copyright (c) 2008, Damien Miller <djm@openbsd.org>...
  • Page 83 clause is necessary due to a potential conflict between DAMAGES (INCLUDING, BUT NOT LIMITED the GNU GPL and the restrictions contained in a TO, PROCUREMENT OF SUBSTITUTE GOODS BSD-style copyright.) OR SERVICES; LOSS OF USE, DATA, OR THIS SOFTWARE IS PROVIDED “AS IS’’ AND PROFITS;...
  • Page 84 contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  • Page 85 © 2021 Sony Corporation...
  • Page 86 5-031-133-11 (1) Video Projector Quick Reference Manual ____________ Guide de référence rapide __________ VPL-VW325ES © 2021 Sony Corporation Printed in China...
  • Page 87 ........Page 17 Replacing the Lamp Downloading Manuals Manuals that describes how to operate the unit can be downloaded from the Sony website. Download the required manual by accessing the site using the following QR code or URL. https://rd1.sony.net/help/vpl/vw290/h_zz/ Manuals are in PDF format. PDF files can be viewed on a computer with Adobe Reader...
  • Page 88 English Before operating the unit, please read this the same or equivalent type recommended manual thoroughly and retain it for future by the manufacturer. reference. - When you dispose of the battery or the product, you must obey the law in the corresponding area or country.
  • Page 89 Trade Name: SONY RG2 IEC 62471-5: Model: VPL-VW325ES 2015. Responsible party: Sony Electronics Inc. Address: 16535 Via Esprillo, For the customers in the U.S.A. San Diego, CA 92127 This equipment has been tested and found to U.S.A.
  • Page 90 SONY LIMITED WARRANTY - Please visit http://www.sony.com/psa/warranty for important information and complete On safety terms and conditions of Sony’s limited • Check that the operating voltage of your warranty applicable to this product. unit is identical with the voltage of your For the customers in Canada local power supply.
  • Page 91 Notes on security SONY WILL NOT BE LIABLE FOR • SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND DAMAGES OF ANY KIND RESULTING FROM THE USE OF...
  • Page 92 Hot and humid Notes on Installation and Usage Unsuitable installation Do not place the unit in the following situations, which may cause malfunction or damage to the unit. Locations subject to direct cool or Near walls warm air from an air-conditioner To maintain the performance and reliability Installing the unit in such a location may of the unit, leave space between walls and...
  • Page 93 15° or more installer. For dealers • When the projector is mounted on the ceiling, a Sony bracket or recommended equivalent must be used for installation. 15° or • Be sure to secure the cabinet cover firmly more when installing to the ceiling firmly.

  • Page 94: Preparing

    Step 1 Preparing Checking the Supplied Accessories Check the carton to make sure it contains the following items: • Remote control RM-PJ28 (1) • Size AA (R6) manganese batteries (2) • Lens cap (1) When you purchase the projector, a lens cap is on the lens.

  • Page 95: Installing The Unit

    Step 2 Installing the Unit Position the unit so that the lens is Front of the unit parallel to the screen. After connecting the AC power cord to Flashes in green for the unit, plug the AC power cord into tens of seconds and a wall outlet.
  • Page 96 To adjust the tilt of the installation surface If the unit is installed on an uneven surface, use the front feet (adjustable) to keep the unit level. Turn to adjust. Front feet (adjustable) Notes • If the unit is tilted up or down, the projected image may be trapezoidal.

  • Page 97: Connecting The Unit

    Step 3 Connecting the Unit When making connections, be sure to do the following: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality.

  • Page 98: Selecting The Menu Language

    Step 4 Selecting the Menu Language You can select the language for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. Press MENU. Press M/m/</, to select a language, and press The menu appears.

  • Page 99: Projecting

    Step 5 Projecting Note Projecting the Picture Never disconnect the AC power cord while the indicator is flashing. Turn on both the unit and the equipment connected to the unit. You can turn off the unit by holding the ?/1 Press INPUT to display the input (ON/STANDBY) button for about 1 second, palette on the screen.
  • Page 100 Selecting the Picture Viewing Mode Press one of the CALIBRATED PRESET buttons. CALIBRATED PRESET buttons Setting items Description CINEMA FILM 1 Picture quality suited to reproducing the highly dynamic and clear images typical of master positive film. CINEMA FILM 2 Picture quality suited to reproducing the rich tone and color typical of a movie theater, based on the Cinema Film 1.

  • Page 101: Warning Indicators

    Both indicators flash Note If the symptom persists even after carrying out the above methods, consult with qualified Sony personnel. If the indicator starts flashing in a way of other than the above, turn off, and then turn on the power with the [/1 (On/Standby) button on the remote control or control panel of the unit.

  • Page 102: Replacing The Lamp

    Maintenance The lamp used for the light source has a • Be sure to turn off the unit and unplug the certain lifespan. When the lamp dims, the power cord before replacing the lamp, then color balance of the picture becomes check the ON/STANDBY indicator has strange, or “Please replace the Lamp.”...
  • Page 103 Push in the new lamp by the handle securely until it reaches the end, and then tighten the 3 screws. Note Be careful not to touch the optical block inside the unit. Close the lamp door (inner cover), and then tighten the screw. Loosen the 3 screws on the lamp with the Phillips screwdriver.
  • Page 104 For additional information, Notes • The unit will not turn on unless the lamp is see www.sony.com/ securely installed in place. mercury...

This manual is also suitable for:

Vpl-vw325es

Table of Contents