Table of Contents
Advertisement
English
Selecting a Soundbar Input Mode
Your soundbar acts as a device for switching between all the input sources that
are plugged into it.
••On the main unit
Press INPUT repeatedly to select a soundbar input source. The corresponding
input source will then be activated.
••On the remote control
When one of the source buttons on the remote control is pressed, the
corresponding input will be activated.
Adjusting the Volume
You can adjust the volume from MIN 00 to MAX 25.
••Press VOL + to increase the volume level.
••Press VOL - to decrease the volume level.
Adjusting the Delay Between the Sound and the Video Image (AV
Sync)
You can delay the sound by using this function when the video image is slower than
the sound on an HDMI connection. You can set the delay from 0 to 330 ms.
••On the main unit
1
Press and hold MUTE until "DELAY" is displayed on the main unit.
2
Press VOL + / VOL - repeatedly to adjust the difference between the video
image and the sound.
3
O
Press
to confirm.
••On the remote control
1
Press and hold Sync + / Sync - until "DELAY" is displayed on the main unit.
2
Press Sync + / Sync - repeatedly to adjust the difference between the
video image and the sound.
3
Press VOL + / VOL - to confirm.
22
Advertisement
Table of Contents
