Pairing The Wireless Subwoofer With The Main Unit - Haier SBEV40SUB User Manual

Pairing the Wireless Subwoofer With the Main Unit

When the soundbar system is manufactured, the pairing is preset. Please pair
the subwoofer with the main unit by following the procedure below if
interference occurs or if pairing is interrupted.
1
Press CONNECT on the back of the subwoofer.
2
Press and hold CONNECT on the remote control for 2 seconds until
"CONNT" displays on the main unit.
3
Check the LED status.
The subwoofer LED blink shows the pairing status as follows.
LED
Blinks slowly
Blinks fast
Blinking stops.
The red LED is continuously on.
Tips:
• If the wireless connection fails, check for any strong interference (for example,
interference from other electronic devices) around your location. After removing
the strong interference, repeat the procedure described on the left.
• If there is a strong electromagnetic wave product nearby, interference
may occur. Place the main unit away from the location.
Pairing Button
Subwoofer LED
OPERATION
The main unit is not paired.
The main unit is trying to be paired.
The main unit is paired completely.
English
15