Electrolux AEG PWE3810-M User Manual page 21

6. Extract the inlet filter with rounded-jaw pliers
7. Clean the inlet filter
8. Insert the inlet filter and place it in its original position
9. Insert the water inlet hose and place it in its original position
10. Insert the filter cartridge in the filter head by pushing it up and rotating it counter-clockwise
11. Push back the appliance until it is locked into position
12. Open the water mains
Cleaning
Warning Do not dispense cold sparkling water during the cleaning procedure
Warning After the procedure always remember to close the water discharge tap to avoid water
leakage
Warning Remove the water dispensed during cleaning process
Warning In case of water leakage dry the base carefully
Warning Lay a cloth under the filter cartridge to prevent the base from getting wet
During cleaning process two kinds of LED signals are shown:
• Flashing power LED:
waiting for user input
• Scanning LEDs, from power to light LED:
working on cleaning, wait for the power LED to flash
1. Dispense all the ice shards
2. Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the
appliance, place the grid back in its original position
3. Turn off the appliance using the power switch
Maintenance and cleaning 21