Electrolux AEG PWE3810-M User Manual page 19

1. Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the
appliance, place the grid back in its original position
2. Remove the safety strip of the CO holder to extract the used bottle
3. Hold the pressure reducer and turn the CO bottle clockwise
4. Screw the new bottle, counter-clockwise, into the pressure reducer
5. Secure the new CO bottle to its holder and fix it with the provided safety strip
6. Push back the appliance until it is locked into position
Filter cartridge replacement
Warning In case of water leakage dry the base carefully
Warning Lay a cloth under the filter cartridge to prevent the base from getting wet
1. Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the
appliance, place the grid back in its original position
2. Turn off the appliance using the power switch
Water may come out from the filter cartridge, therefore place a cloth on the filter head and
cartridge to prevent the cabinet from getting wet.
If there is water on the base, dry it carefully.
₂
₂
₂
Maintenance and cleaning 19