Page 1
Operating Instructions 4K Integrated Camera AW‑UE100WP Model No. AW‑UE100KP Model No. AW‑UE100WPC Model No. AW‑UE100KPC Model No. AW‑UE100WE Model No. AW‑UE100KE Model No. AW‑UE100WED Model No. AW‑UE100KED Model No. Before operating this product, please read the instructions carefully and save this manual for future use. Please carefully read the “Read this first!”...
Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug. indicates safety information.
Page 3
FCC NOTICE (USA) Supplier’s Declaration of Conformity Model Number: AW-UE100WP/AW-UE100KP Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102 Support contact: 1-800-524-1448 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug. indicates safety information.
Page 5
FCC NOTICE (USA) Supplier’s Declaration of Conformity Model Number: AW-UE100WPC/AW-UE100KPC Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102 Support contact: 1-800-524-1448 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. Fuse A replacement fuse cover can be purchased from your local Panasonic Dealer. indicates safety information. The symbols on this product (including the accessories) represent the following:...
For more information about collection and recycling, please contact your local municipality, dealer or supplier. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Manufactured by: Panasonic Corporation, Osaka, Japan Importer’s name and address of pursuant to EU rules:...
Model number of unit manual • Intel and Intel Core™ are trademarks or registered trademarks ® ® AW-UE100WP, AW-UE100KP, of Intel Corporation in the United States and other countries. AW-UE100WPC, AW-UE100KPC, • Adobe and Reader are either registered trademarks or ®...
SDI, so the unit can be used flexibly in a wide range of situations as a For iPhone, iPad: 4K-compatible remote camera. Safari • Connection with a Panasonic camera controller is also possible via iPadOS Panasonic's proprietary serial communication format. For Android: Android OS •...
Panasonic does not accept any responsibility for damage of this type. https://pro-av.panasonic.net/ • Use the unit in a network secured by a firewall, etc.
The unit can also be used together with the cameras and pan-tilt will restart automatically, and the image will be interrupted. head unit systems currently available from Panasonic Corporation • Use a Category 5e cable or higher when using a PoE++ power so that an existing system can be used to advantage to put supply.
Accessories Check that the following accessories are present and accounted for. • After removing the product from its container, dispose of the power cable cap (if supplied) and packing materials in an appropriate manner. Mount bracket for installation surface Main unit mounting screw (with flat Drop‑prevention wire (1) (Hanging/Desktop) (1) washer, spring washer)
Operating precautions Do not use the unit in oily‑smoky or dusty When using the automatic functions • In the [Scene] such as the camera menu, the initial settings on places. some items has been set to auto, making it impossible for these Performance may be adversely affected if small particles or other items to be operated manually.
Page 15
This product includes MIT Licensed software. This product includes BSD Licensed software. For details on obtaining the source codes, visit the following website. https://pro-av.panasonic.net/ However, do not contact Panasonic for questions regarding obtained source codes.
Wireless remote control (optional accessory) This unit can be operated by remote control using a wireless <Layout of wireless remote control signal light‑sensing areas> remote control (model number: AW‑RM50G) purchased separately. Check out the following points before using the wireless remote <NOTE>...
Parts and their functions Camera unit Mount bracket for installation surface (supplied accessory) Mount this bracket onto the installation surface, and then attach the camera main unit to the bracket. Drop‑prevention wire This wire is screwed down to the bottom panel of the camera main unit.
Page 18
Parts and their functions (continued) RS‑422 connector <RS‑422> G/L IN connector <G/L IN> This RS-422 connector (RJ-45) is connected when exercising serial This is the external sync signal input connector. control over the unit from an external device. Use a cable with the This unit supports BBS (Black Burst Sync) and tri-level following specifications for the connection to this connector.
Page 19
Parts and their functions (continued) Initialization 1 DC IN connector <12V > • Reset the user authentication settings and host authentication Connect the AC adaptor supplied with the unit to this connector to settings for network connection. supply the DC 12 V voltage to the unit. (This will delete all the registered user information (IDs/passwords) ...
Page 20
Parts and their functions (continued) Output conditions for each video format Frequency System Format HDMI 12G SDI OUT 3G SDI OUT 2160/59.94p 2160/59.94p 1080/59.94p 2160/59.94p 2160/59.94p 1080/59.94p 1080/59.94p 1080/59.94i 2160/29.97p 2160/29.97p 2160/29.97p 1080/29.97p 2160/29.97p 1080/29.97p 1080/29.97p 1080/59.94p 1080/59.94p 1080/59.94p 1080/59.94p 1080/59.94p...
Page 21
Parts and their functions (continued) IP video transmission output (multi‑channel display) • When “Streaming mode” is set to “H.265” Settings H.265(1) H.265(2) H.264(1) H.264(2) H.264(3) H.264(4) JPEG(1) JPEG(2) JPEG(3) 1920×1080 1920×1080 1920×1080 1280×720 1280×720 1280×720 Resolution — — —...
Page 22
Parts and their functions (continued) • When “Streaming mode” is set to “H.264” Settings H.265(1) H.265(2) H.264(1) H.264(2) H.264(3) H.264(4) JPEG(1) JPEG(2) JPEG(3) 1920×1080 1920×1080 1920×1080 1280×720 1280×720 1280×720 1280×720 1280×720 Resolution — — 640×360 640×360 640×360 640×360 640×360 640×360 320×180 320×180 320×180...
Page 23
Parts and their functions (continued) • When “Streaming mode” is set to “JPEG (UHD)” Settings H.265(1) H.265(2) H.264(1) H.264(2) H.264(3) H.264(4) JPEG(1) JPEG(2) JPEG(3) 3840×2160 1920×1080 1920×1080 Resolution — — 1280×720 1280×720 1280×720 1280×720 — — 640×360 640×360 640×360 320×180 320×180 320×180 60fps...
Page 24
Parts and their functions (continued) • When “Streaming mode” is set to “RTMP(UHD)” Settings H.265(1) H.265(2) H.264(1) H.264(2) H.264(3) H.264(4) JPEG(1) JPEG(2) JPEG(3) 3840×2160 1920×1080 Resolution — — — — — 1280×720 640×360 640×360 640×360 320×180 320×180 320×180 60fps 30fps 30fps 30fps 30fps...
Page 25
Parts and their functions (continued) • When “Streaming mode” is set to “SRT(H.265 UHD)” Settings H.265(1) H.265(2) H.264(1) H.264(2) H.264(3) H.264(4) JPEG(1) JPEG(2) JPEG(3) 3840×2160 1920×1080 Resolution — — — — — 1280×720 640×360 640×360 640×360 320×180 320×180 320×180 30fps 30fps 30fps 30fps...
Page 26
Parts and their functions (continued) • When “Streaming mode” is set to “SRT(H.264 UHD)” Settings H.265(1) H.265(2) H.264(1) H.264(2) H.264(3) H.264(4) JPEG(1) JPEG(2) JPEG(3) 3840×2160 1920×1080 Resolution — — — — — 1280×720 640×360 640×360 640×360 320×180 320×180 320×180 60fps 30fps 30fps 30fps...
Page 27
Parts and their functions (continued) • When “Streaming mode” is set to “High bandwidth NDI” Settings H.265(1) H.265(2) H.264(1) H.264(2) H.264(3) H.264(4) JPEG(1) JPEG(2) JPEG(3) 1920×1080 1280×720 Resolution — — — — — — — — 640×360 320×180 30fps System 15fps frequency —...
Parts and their functions (continued) CAM1 to CAM4 buttons Wireless remote control: AW‑RM50G (optional <CAM1> <CAM2> <CAM3> <CAM4> accessory) Selects a camera to be operated. Once a button has been selected, the unit corresponding to the selected button can be operated. SET button <SET>...
Page 29
Parts and their functions (continued) Pan‑tilt buttons and menu operation buttons HOME button <HOME> <4> <5> <b> <a> <M> When this is pressed for 2 seconds, the unit’s direction (panning or tilting) returns to the reference position. 1) These are used to change the unit’s direction. The unit is tilted in the up/down direction using the <4>...
Setting the remote control IDs Setting the installation method (“Desktop” or The wireless remote control (optional accessory) is capable of operating up to four units. “Hanging”) from the OSD menu IDs are used to set which units are selected when the <CAM1>, Set “Desktop”...
Easy IP Setup Software. You can obtain Easy IP Setup Software (EasyIPSetup.exe) by downloading it from the following website. https://pro-av.panasonic.net/ To establish the settings for a multiple number of units, the settings must be selected for each camera involved. If the settings cannot be established using the Easy IP Setup Software, select the settings separately for the unit and personal computer on the Network setup screen [Network] of the setting menu.
Page 32
Network settings (continued) Network Settings Automatically assigning IP addresses Start the Easy IP Setup Software Version.2. Start the Easy IP Setup Software Version.2. Click the [Search] button. Click the [Auto IP] button. <NOTE> Click the camera to be set, and click the [Network •...
Network settings (continued) Setting the initial account Installing the plug‑in viewer software Set the initial account. To view IP images from the unit on Windows Internet Explorer 11, the "Network Camera View 4S" plug-in viewer software (ActiveX ) must be ®...
Basic shooting operations Set the subject brightness to the appropriate level. Turn on the power of all the units and devices in the system. Select the unit to be operated. Even when using only one unit, it must still be selected from the wireless remote control or controller.
How to turn the power on and off Turning the power on Turning the power off When performing operations from a wireless When performing operations from a wireless remote control remote control Set all the power switches of the units and devices Press one of the <CAM1>...
Selecting the units Select the unit (or units) to be operated from the wireless remote control or controller. Even when using only one unit, it must still be selected. When performing operations from a wireless remote control Up to four units can be operated using one wireless remote control. To select the unit using the wireless remote control, the IR ID switches on the unit’s back panel must be set.
Selecting the shooting modes (scene files) Press and hold the <MENU> button for about 2 seconds. Types of shooting modes The Top Menu is displayed. One of four shooting modes (Scene1, Scene2, Scene3 or Scene4) — whichever one will best suit the shooting conditions — can be selected. T o p M e n u The shooting modes are set by the user.
Shooting When performing operations from a wireless When performing operations from a controller remote control Changing the camera’s direction Changing the camera’s direction Moving the camera toward the left or right (panning): Tilt the <PAN/TILT> lever toward L or R. Moving the camera toward the left or right (panning): Press the <b>...
What to do when encountering problems in the basic shooting operations When performing operations from a controller If the trouble is not resolved by taking the action suggested below, refer to “Troubleshooting” (→ page 165). The unit does not move. When performing operations from a wireless •...
More advanced operations Manual shooting (→ page 41) • Manually adjusting the focus • Manually adjusting the iris • Manually adjusting the shutter speed • Manually adjusting the gain Preset memories (→ page 42) • Up to 100 settings for the camera direction (panning and tilting), zoom, focus, iris, gain up and white balance can be registered in the preset memories, and called.
Manual shooting Manually adjusting the focus Manually adjusting the shutter speed The lens focus can be adjusted manually. The shutter speed can be set using two methods. One is a method that specifies the time (where a time such as 1/250 sec. is designated), and When performing operations from a wireless the other is a method that specifies the frequency (where synchro scan, 60.2 Hz, etc.
Preset memories When performing operations from a wireless This unit enables up to 100 settings for the camera direction (panning and tilting), zoom, focus, iris, gain and white balance to be registered in remote control its preset memories, and called. However, the number of settings that can be registered and called Twelve settings (preset No.1 to No.12) can be registered and called depends on the type of wireless remote control or controller that is used...
White balance adjustment Adjust the ratio between the three primary colors (RGB) to reproduce Automatic adjustment (AWB: AWB A or AWB B) white accurately. If the white balance is out of adjustment, not only will When performing operations from a wireless white be reproduced poorly, but the color tones of the screen as a whole will also be degraded.
White balance adjustment (continued) Press the <SET> button. 3200K and 5600K presets The auto white balance adjustment (AWB) is performed, and the When [3200K] or [5600K] is selected for the white balance, the white white balance setting is entered. balance is set using a color temperature of 3200 K (equivalent to •...
Black balance adjustment When performing operations from a controller Adjust the zero levels of the three primary colors (RGB) to reproduce black accurately. If the black balance is out of adjustment, not only will black be reproduced poorly, but the color tones of the screen as a whole When using an AW-RP150 or AW-RP60 will also be degraded.
Black level (master pedestal) adjustment When performing operations from a controller The black level can be adjusted when using a multiple number of cameras including the unit. Ask your dealer to perform this adjustment. (Use an oscilloscope or waveform monitor for the adjustment.) When using an AW-RP150 or AW-RP60 Adjust the black level in accordance with the units and devices used.
Genlock adjustment Press the <4> or <5> button to bring the cursor to The genlock adjustment is performed to achieve phase alignment by applying external synchronization (genlock) when a multiple number of [Horizontal Phase], and press the <M> button. cameras will be used or when the unit will be used in combination with The [Horizontal Phase] value starts blinking.
Basic setup operations Camera menus are displayed on the monitor when the unit’s settings are When performing the operations using the to be selected. wireless remote control The monitor is connected to the video signal output connector. The basic camera menu operations involve displaying sub-menus from Press the <CAM1>, <CAM2>, <CAM3>...
Camera menu items Setting the camera menu items Top Menu screen Camera menus are displayed on the monitor when the unit’s settings are T o p M e n u to be selected. The basic camera menu operations involve displaying sub-menus from C a m e r a the Top Menu items, and selecting settings on the sub-menus.
Camera menu items (continued) Camera screen Brightness 1/2 screen This menu is used for the camera image settings. This menu item is selected to set the brightness of the pictures. C a m e r a B r i g h t n e s s 1 / 2 S c e n e Scene1 P i c t u r e L e v e l...
Camera menu items (continued) Shutter Mode [Off, Step, Synchro, ELC] Brightness 2/2 screen Select for camera shutter mode. The shutter is set to OFF. B r i g h t n e s s 2 / 2 Step The step shutter is set (the steps can be changed). Synchro The synchro shutter is set (the setting can be changed G a i n...
Camera menu items (continued) ND Filter [Through, 1/4, 1/16, 1/64] Picture 1/6 screen Set the transmittance of the lens' built-in ND (neutral density) filter. The filter switches when the setting is fixed. P i c t u r e 1 / 6 Through Do not set ND filter.
Camera menu items (continued) ATW Speed [Normal, Slow, Fast] Color TEMP. Setting screen Set the control speed of the ATW function. Normal Tracks at normal speed. C o l o r T E M P . S e t t i n g Slow Tracks at a speed slower than [Normal].
Camera menu items (continued) Picture 2/6 screen Picture 3/6 screen P i c t ure 2/6 P i c t u r e 3 / 6 C h r o m a L eve l D e t a i l C h r o m a P has e M a s t e r D e t a i l M a s t e r P ede stal...
Camera menu items (continued) Picture 4/6 screen Picture 5/6 screen P i c t u re 4/6 P i c t u r e 5 / 6 S k i n D e t a il G a m m a M o d e S k i n D e t ail Eff ect G a m m a 0 .
Camera menu items (continued) Picture 6/6 screen Matrix 1/5 screen P i c t ure 6/6 M a t r i x 1 / 5 K n e e M o d e Auto M a t r i x T y p e N o r m a l A u t o K n ee Resp onse A d a p t i v e M a t r i x...
Camera menu items (continued) Matrix 2/5 screen Matrix 3/5 screen M a t r i x 2 /5 M a t r i x 3 / 5 [Lin ear Ma trix] [ C o l o r C o r r e c t i o n 1 / 3 ] R - G S a t u r a t i o n P h a s e...
Camera menu items (continued) Matrix 4/5 screen Matrix 5/5 screen M a t r ix 4/5 M a t r i x 5 / 5 [Col or Cor rectio n 2/3] [ C o l o r C o r r e c t i o n 3 / 3 ] S atur ation Phase S a t u r a t i o n...
Camera menu items (continued) Digital Extender [Off, ×1.4, ×2.0] Lens screen Make settings for the digital extender function. Turn the digital extender function off. L e n s ×1.4 The digital zoom will be fixed at 1.4×. ×2.0 The digital zoom will be fixed at 2.0×. F o c u s M o d e Auto C r o p A F...
Camera menu items (continued) UHD Crop [Off, Crop(1080), Crop(720)] System 1/2 screen Sets the Crop function which crops UHD(3840×2160) images. Disable the Crop function. S y s t e m 1 /2 Crop(1080) Crops the designated area from UHD(3840×2160) images and outputs 1920×1080 images. F r e q u e n c y 5 9.94Hz The images are cropped to the following sizes.
Camera menu items (continued) Crop Zoom [Off, On] System 2/2 screen Sets whether UHD(3840×2160) images should be cropped by using digital zoom. S y s t e m 2 / 2 Images are cropped to the following sizes. • When [UHD Crop] is Crop(1080) T r a c k i n g D a t a O u t p u t 1920×1080 S e r i a l...
Page 62
Camera menu items (continued) IP [Off, On] Fan [Auto, Low, Mid, High] Sets the UDP output function [On] or [Off] to output tracking data, Set the operation of the cooling fan. such as Pan/Tilt/Zoom or other information from the IP output, Auto Enable automatic control of the cooling fan.
Page 63
Camera menu items (continued) Changing the frequency Changing the format When the currently selected frequency is changed in the [System 1/2] When the currently selected format is changed in the [System 1/2] screen, the pre-frequency-change confirmation screen appears. screen, the pre-format-change confirmation screen appears.
Page 64
Camera menu items (continued) Tracking data output Camera Focus Stores the value of focus position of this unit between 000555h When [Serial] or [IP] of [Tracking Data Output] on the [System 2/2] (NEAR) and 000FFFh (FAR). screen is set to [On], outputs the tracking data for Pan/Tilt/Zoom or other information to link with a virtual studio system or elsewhere via serial Spare / User Defined (16bit) (RS-422) or IP output.
Page 65
Camera menu items (continued) z IP output • When [IP] of [Tracking Data Output] on the [System 2/2] screen is set to [On], the tracking data for Pan/Tilt/Zoom or other information is synchronized with the Genlock signal and outputs UDP packets via IP. •...
Camera menu items (continued) 3G SDI Out [LevelA, LevelB] Output 1/5 screen When [Format] (12G SDI) is [1080/59.94p] or [1080/50p], select the format for outputting 3G SDI signals. O u t p u t 1 /5 LevelA Level A format LevelB Level B format 1 2 G S D I...
Camera menu items (continued) Video Sampling [4:2:2/10bit, 4:2:0/8bit] Output 2/5 screen When [Format] in [HDMI] is [2160/59.94p] or [2160/50p], select the video sampling output from the HDMI connector. O u t p u t 2/ 5 4:2:2/10bit Output in 4:2:2/10bit mode. 4:2:0/8bit Output in 4:2:0/8bit mode.
Camera menu items (continued) Output 3/5 screen Output 4/5 screen O u t p u t 3 /5 O u t p u t 4 / 5 B a r Camera O S D M i x / C r o p M a r k e r C o l o r B ar Type Type2 1 2 G S D I...
Page 69
Camera menu items (continued) Exclusive conditions for [OSD Mix/Crop • When [3G SDI Out], [NDI Out], or [IP Out1], and [IP Out2] on the [UHD Crop 1/2] screen are set to [Crop] Marker] [OSD Mix/Crop Marker] of the relevant connector is constantly set The following exclusive conditions exist for Off/On setting of each output to Off and displayed as “‑‑‑”...
Camera menu items (continued) Output 5/5 screen UHD Crop 1/2 screen O u t p u t 5 /5 U H D C r o p 1 / 2 O S D O f f Wit h R- Tally 3 G S D I O u t C r o p O S D S t a t us N D I O u t...
Camera menu items (continued) Crop Marker [Off, YL, G, MG, YL+G, YL+MG, G+MG, UHD Crop 2/2 screen YL+G+MG] Makes the settings for the crop frame displayed for images output to U H D C r o p 2 / 2 12G SDI OUT, 3G SDI OUT, HDMI and LAN connectors.
Page 72
Camera menu items (continued) Crop Zoom Ratio [120.00% to 500.00%] The CROP function Specifies the size of the crop frame when [Crop Zoom] is [On]. When [UHD Crop] is set to [Crop(1080)] or [Crop(720)], it is possible The crop zoom ratio can be specified between the range of 120.00% to output images cropped from UHD signals from the 3G SDI OUT and to 500.00%, and the grain-size can be set in units of 10.00% from the LAN connectors.
Camera menu items (continued) Focus Adjust With PTZ. [Off, On] Pan/Tilt 1/2 screen [Off] or [On] is set here for the function which compensates for out-of- focusing when it occurs during panning, tilting or zooming operations. P a n / T i lt 1/2 When [Off] is set, adjust the focus as required after zooming or set [Focus Mode] to [Auto].
Camera menu items (continued) Pan/Tilt 2/2 screen P/T Acceleration screen P a n / T ilt 2/2 P / T A c c e l e r a t i o n P o w e r O n Po siti on S tandby P / T A c c e l e r a t i o n A u t o...
Page 75
Camera menu items (continued) Fall Acceleration [1 to 255] Sets the deceleration speed for pan/tilt deceleration operation in 255 steps. (The deceleration speed increases as the number increases) When it is necessary to reduce the speed to the specified speed using manual control of pan/tilt by lever operation etc.
Camera menu items (continued) Preset Digital Extender [Off, On] Preset 1/2 screen Turns the preset digital extender function off/on. When set to [On], the digital extender function configuration will be P r e s e t 1 /2 recalled when regenerating the preset memory. When set to [Off], the digital extender function configuration will not P r e s e t S pee d Un it Speed Table...
Camera menu items (continued) Preset Name [Reset, Hold] Preset 2/2 screen When registering a preset memory, set whether to reset the previously registered preset name or keep it. P r e s e t 2 / 2 Reset When registering a preset memory, reset the previously registered preset name.
Camera menu items (continued) Fall Acceleration [1 to 255] Preset Acceleration screen Sets the deceleration speed for pan/tilt deceleration operation in 255 steps. (The deceleration speed increases as the number increases) P r e s et Acce lerati on During the deceleration operation for operating at the specified speed or time during pan/tilt operations by preset playback, the deceleration P r e s e t A cce lera tion Auto...
Page 79
Camera menu items (continued) The relationships between the various setting values when [Preset Acceleration] is set to [Manual] during preset playback z When [Preset Speed Unit] is [Speed Table] It is possible to specify the responsiveness (maximum speed, acceleration rate, S-curve steps) for operation. <NOTE>...
Page 80
Camera menu items (continued) z When [Preset Speed Unit] is [Time] It is possible to specify the times (time taken to move, time taken to accelerate, time taken to decelerate) and the S-curve steps for operation. <NOTE> • When the acceleration operation cannot be performed within the specified time even at maximum acceleration speed of the device, the operation will not be performed by the specified time.
Camera menu items (continued) Maintenance screen Firmware Version 1/2 screen M a i n t e nan ce F i r m w a r e V e r s i o n 1 / 2 F i r m w a r e Ver sion S y s t e m V e r s i o n V 0 1 .
Camera menu items (continued) Firmware Version 2/2 screen IP Network screen F i r m war e Ve rsion 2/2 I P N e t w o r k E E P R O M I P A d d r e s s M a i n / N e two rk V01.00 1 9 2 .
Camera menu items (continued) Concerning initialization Initialize screen When any one of [All/Scene All/Scene1/Scene2/Scene3/Scene4] is selected on the [Initialize] screen, the Initialize confirmation screen is I n i t i ali ze displayed. A l l Initialize confirmation screen S c e n e A l l S c e n e 1 I n i t i a l i z e...
Camera menu items (continued) Hour Meter screen HDMI Status screen H o u r Me ter H D M I S t a t u s H D M I O p e r a t i o n 00 000000 C o n n e c t F a n 00 000000...
Camera menu items (continued) Monitor Error Status screen Displays the status of the device or monitor connected to the HDMI connector. E r r o r S t a t u s One of the following is displayed according to the product specifications of the device or monitor connected.
Camera menu item table Camera menu Item Factory setting Selection items Top Menu Camera Scene Scene Scene1 Scene1, Scene2, Scene3, Scene4 Brightness Brightness Picture Level –50 to +50 (step: 1) Iris Mode Auto Manual, Auto Auto Iris Speed Normal Slow, Normal, Fast Auto Iris Window Normal1 Normal1, Normal2, Center...
Page 87
Camera menu item table (continued) Camera menu Item Factory setting Selection items Top Menu Camera Scene Picture Picture 2/6 Chroma Level Off, –99% to 99% (step: 1%) Chroma Phase –31 to +31 Master Pedestal –200 to +200 (step: 1) R Pedestal –100 to +100 (step: 1) G Pedestal –100 to +100 (step: 1)
Page 88
Camera menu item table (continued) Camera menu Item Factory setting Selection items Matrix 4/5 [Color Correction 2/3] Normal EBU NTSC User Top Menu Camera Scene Matrix R_Yl Saturation –7 –4 –8 –63 to +63 R_Yl Phase –63 to +63 R_Yl_Yl Saturation –12 –63 to +63 R_Yl_Yl Phase...
Page 89
Camera menu item table (continued) Camera menu Item Factory setting Selection items Top Menu Output Output 1/5 12G SDI AW‑UE100WP/AW‑UE100KP/ [System Format] [12G SDI] Format AW‑UE100WPC/ 2160/59.94p 2160/59.94p AW‑UE100KPC: 1080/59.94p 2160/59.94p 2160/29.97p 2160/29.97p AW‑UE100WE/AW‑UE100KE/ 1080/29.97p AW‑UE100WED/ 1080/59.94p 1080/59.94p AW‑UE100KED: 1080/59.94i 1080/59.94i 2160/50p 1080/29.97p...
Page 90
Camera menu item table (continued) Camera menu Item Factory setting Selection items Top Menu Output Output 2/5 HDMI Format AW‑UE100WP/AW‑UE100KP/ [System Format] [HDMI] AW‑UE100WPC/ 2160/59.94p 2160/59.94p AW‑UE100KPC: 1080/59.94p 2160/29.97p 2160/59.94p 2160/29.97p AW‑UE100WE/AW‑UE100KE/ 1080/29.97p AW‑UE100WED/ 1080/59.94p 1080/59.94p AW‑UE100KED: 1080/59.94i 1080/59.94i 2160/50p 1080/29.97p 1080/29.97p 1080/29.97PsF...
Page 91
Camera menu item table (continued) Camera menu Item Factory setting Selection items Top Menu UHD Crop UHD Crop Crop Out YL, G, MG Crop Adjust YL, G, MG Crop H Position 0 to 3072 (Step: 2) Crop V Position 0 to 1728 Crop Zoom Ratio 200.00% 120.00% to 500.00%...
Page 92
Camera menu item table (continued) Camera menu Item Factory setting Selection items Top Menu Maintenance Firmware Version Firmware System Version Version at shipping - - - Version 1/2 CPU Software Main/Network Version at shipping - - - Camera Version at shipping - - - Lens Version at shipping...
Displaying the web screen With a personal computer connected to the unit, it is possible to view the Displaying the web screen using a personal camera’s IP videos or select various settings from the web browser. computer The LAN crossover cable is used when connecting a personal computer The procedure is explained here using Windows screens (Internet Explorer).
Page 94
Displaying the web screen (continued) Set the initial account. Display the live screen [Live]. In the initial state, the initial account setting screen is displayed when The web screen appears. the web screen is displayed. The live screen [Live] (→ page 96) is displayed initially. You Set a user name and password.
Displaying the web screen (continued) Switching between the Live screen [Live] and Logging into the Web screen Web setup screen [Setup] When user authentication is enabled When displaying the live screen [Live] When the live screen [Live] You need to enter account information for a user with Camera control displayed, click the [Setup] button at the top of the or Administrator privileges.
Web screen operations Live screen [Live] You can display images from the camera on a personal computer and perform camera operations, such as pan, tilt, zoom, and focus control. The items displayed on the screen will differ depending on whether the [H.264] or [JPEG] button is selected under [Compression]. When [H.264] is selected Operation screen display buttons (for touch Expansion panel display button...
Page 97
Web screen operations (continued) Menu switching [Stream Menu]/[Other Menu] When JPEG is selected These buttons appear only when JPEG images are displayed. Switch between menu displays. Clicking [Other Menu] when the Stream menu is displayed displays When selected, the button turns gray, and the images the Other menu.
Page 98
14 users. using a Panasonic controller (AW-RP150, AW-RP60) or release • When [Disable] is selected for [Tally] (→ page 70, page 108), [Lock(CAM)] from the web browser while the camera is locked.
Page 99
Web screen operations (continued) Zoom [Zoom] Control pad and its buttons [T]: Use this to adjust the zoom (magnification) in the “Tele” direction. To adjust the image in the horizontal or vertical [W]: Use this to adjust the zoom (magnification) in direction (panning or tilting), left-click the pad and the “Wide”...
Page 100
Web screen operations (continued) Scene [Scene] Shutter [Shutter] Switch the shutter mode in the order [Off], [Step], Click Scene1-Scene4 to switch the shooting [Synchro], [ELC]. [Scene1] [Scene2] mode. Switch the shutter mode in the order [ELC], [Synchro], [Scene3] [Scene4] [Step], [Off]. Display button for scene expansion panel The [Scene1], [Scene2], [Scene3], and [Scene4] <NOTE>...
Web screen configurations Web setup screen [Setup] The settings for the unit are selected on this screen. <NOTE> • The setting menu operations can be performed only by users whose access level is “1.Administrator”. For the procedure used to set the access level, refer to page 139. •...
Web screen configurations (continued) Collaboration capability [Linkage] Setting status screen [Setting status] Tracking data output setting button [Tracking Data Output] The tracking data output setting screen [Tracking Data Output] is displayed when the button is clicked. → “Tracking data output settings screen [Tracking Data Output]” (→...
Web screen configurations (continued) Pan/Tilt Basic screen [Basic] Install Position System screen [System] The install position setting is displayed. Smart Picture Flip z System status The smart picture flip setting is displayed. P/T Speed Mode The P/T speed mode setting is displayed. Speed With Zoom Position The settings for the function to adjust the speed of pan/tilt adjustment are displayed in conjunction with the zoom magnification.
Page 104
This item is selected to switch the frame frequency. Shooting Mode [Normal, High Sens.] The setting is confirmed with the [Set] button. Select the shooting mode according to the shooting environment. Factory settings: 59.94Hz (AW-UE100WP/AW-UE100KP/ The setting is confirmed with the [Set] button. AW-UE100WPC/AW-UE100KPC) 50Hz (AW-UE100WE/AW-UE100KE/...
Page 105
Web screen configurations (continued) z Fan z Output Set the cooling fan operation. The setting is confirmed with the [Set] button. <NOTE> • Even if this is set to [Low], [Mid], or [High], the cooling fan may be forcibly stopped when the temperature is low.
Page 106
It denotes “1080/23.98p over 59.94i”. Cannot be selected when [Crop Mode] is [Crop(1080)] or When [Crop Mode] is [Crop(720)], output is 720/50p. [Crop(720)]. Factory settings: 1080/59.94p (AW-UE100WP/AW-UE100KP/ When [Crop Mode] is [Crop(720)], output is 720/59.94p. AW-UE100WPC/AW-UE100KPC) It denotes “1080/23.98p over 59.94i”.
Page 107
It denotes “1080/23.98p over 59.94p”. IP/NDI|HX [Off, On When [Crop Mode] is [Crop(720)], output is 720/50p. Selects whether to turn this Off/On for images other than NDI images Factory settings: 2160/59.94p (AW-UE100WP/AW-UE100KP/ (H.264/H.265/JPEG/RTMP/SRT/NDI|HX) output from the LAN AW-UE100WPC/AW-UE100KPC) connector. 2160/50p (AW-UE100WE/AW-UE100KE/...
Page 108
Web screen configurations (continued) OSD Off With R‑Tally [Off, On] z Pan/Tilt Off or on the function that turns off camera menu, status, crop frame The setting is confirmed with the [Set] button. and other displays when red tally signals are received via commands or contacts.
Page 109
Web screen configurations (continued) P/T Speed Mode [Normal(60deg/s), Fast1(90deg/s), Fall Acceleration [1 to 255] Sets the deceleration speed for pan/tilt deceleration operation in 255 Fast2(180deg/s)] steps. (The deceleration speed increases as the number increases) Set the speed of pan/tilt operation. When it is necessary to reduce the speed to the specified speed Normal(60deg/s) Pan/tilt operates at normal speed (maximum about...
Page 110
Web screen configurations (continued) Date & time screen [Date&Time] Live page screen [Live page] Make clock settings. You can set using one of three types [PC Synchronization], [NTP], or [Manual]. Auto Camera title PC Synchronization Input the name of the camera here. If you click the [Execute] button, the settings are configured by When the [Set] button is clicked, the input name appears in the synchronizing the unit to the date and time of the connected personal...
Web screen configurations (continued) z Streaming mode Image screen [Image/Audio] It is possible to perform IP transmission operations suited to the IP video settings screen [Video over IP] application by switching the [Streaming mode] on this unit. The setting is confirmed with the [Set] button.
Page 112
Web screen configurations (continued) z Initial display setting z JPEG Set initial display settings for the Live screen [Live]. Set JPEG image settings. The setting is confirmed with the [Set] button. The setting is confirmed with the [Set] button. There are a total of 3 channels available for JPEG image setting.
Page 113
Web screen configurations (continued) Refresh interval [1fps, 4fps, 5fps, 12fps, 12.5fps, 15fps, <NOTE> • On browsers other than Internet Explorer 11, only JPEG images can 24fps, 25fps, 30fps] be displayed. Select the frame rate for JPEG images. • Only [H.264(1)] can be set when the [Streaming mode] is 59.94Hz 1fps/5fps/15fps/30fps [H.264(UHD)].
Page 114
Web screen configurations (continued) Image capture size [3840×2160, 1920×1080, 1280×720, Max bit rate(per client) 640×360, 320×180] [512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, Select the resolution for H.264 images. 3072kbps, 4096kbps, 6144kbps, 8192kbps, 10240kbps, Selectable options will vary depending on the selected resolution 12288kbps, 12800kbps, 14336kbps, 16384kbps, 20480kbps, setting.
Page 115
Web screen configurations (continued) Unicast port(Image) [1024 to 50000] z H.265 Enter the unicast port number (used when sending images from the Set H.265 image settings. unit). The setting is confirmed with the [Set] button. Only even numbers can be specified. The port number cannot be set to 10670.
Page 116
Web screen configurations (continued) Frame rate [24fps, 25fps, 30fps, 50fps, 60fps] z RTMP Set the frame rate for H.265 images. Make RTMP/RTMPS transmission settings. 59.94Hz 30fps, 60fps Server setup 50Hz 25fps, 50fps The setting is confirmed with the [Set] button. 24/23.98Hz 24fps Factory settings:...
Page 117
Web screen configurations (continued) Streaming format z SRT Make settings for H.264 images for use in RTMP/RTMPS Make SRT transmission settings. transmission. <NOTE> The setting is confirmed with the [Set] button. • When starting SRT transmissions in the [Listener] mode, set the Refer to the explanation for H.264 (→...
Page 118
Web screen configurations (continued) TTL/HOP Limit z NDI|HX The same as H.264 Multicast TTL/HOPLimit (→ page 115). Make NDI|HX transmission settings. The setting is confirmed with the [Set] button. Latency Sets the time (ms) of playback on the listening side after the packet is NDI|HX stream transmitted.
Page 119
Web screen configurations (continued) Max bit rate(per client) z High bandwidth NDI [512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps, Make NDI transmission settings. 4096kbps, 6144kbps, 8192kbps, 10240kbps, 12288kbps, The setting is confirmed with the [Set] button. 14336kbps, 16384kbps, 20480kbps, 24576kbps] Specify the NDI|HX bit rate per client.
Page 120
Web screen configurations (continued) Subnet(IPv4) Audio setting screen [Audio] Enter the subnet mask. Configure audio settings. Factory settings: 224.0.0.0 <NOTE> • Images and audio are not synchronized. Therefore, images and audio <NOTE> may be slightly out of sync. •...
Page 121
Web screen configurations (continued) z Audio Image adjust screen [Image adjust] The setting is confirmed with the [Set] button. Adjust the image quality. The settings in this screen (with the exception of [Scene] and [Matrix]) are applied immediately. After selecting the settings for [Scene] and [Matrix], you need to press the [Set] button to execute.
Page 122
Web screen configurations (continued) Picture Level [–50 to +50] Shutter Mode [Off, Step, Synchro, ELC] This menu item is selected to set the target picture level for automatic Select for camera shutter mode. exposure compensation. The shutter is set to OFF. Its setting takes effect when [Auto] or [ELC] has been selected as Step The step shutter is set (the steps can be changed).
Page 123
Web screen configurations (continued) Gain Day/Night [When [Super Gain] is [Off]: Auto, 0dB to 36dB, [Day, Night] When [Super Gain] is [On]: Auto, 0dB to 42dB] Switch between standard shooting and night-vision shooting (shooting with infrared light). The image gain is adjusted here. In locations which are too dark, adjust the gain upward;...
Page 124
Web screen configurations (continued) z Picture ...
Page 125
Web screen configurations (continued) White Balance Mode Color Temperature Setting [ATW, AWB A, AWB B, 3200K, 5600K, VAR] Color Temperature [2000K to 15000K] Set the white balance mode. This displays the color temperature when [White Balance Mode] is Select the mode when the coloring is not natural because of the [AWB A] or [AWB B].
Page 126
Web screen configurations (continued) ATW Speed [Slow, Normal, Fast] Detail [Off, On] Set the control speed of the ATW function. Turn on/off the contour (sharpness of images) adjustment of images. Factory settings: On Slow Tracks at a speed slower than [Normal]. Normal Tracks at normal speed.
Page 127
Web screen configurations (continued) Gamma Mode White Clip [Off, On] [HD, FILMLIKE1, FILMLIKE2, FILMLIKE3] Turn the white clip function off/on. Factory settings: On Select the type of gamma curve. HD (High Definition) video gamma characteristic. White Clip Level [90% to 109%] FILMLIKE1 Characteristic capable of reproducing better gradation in Set the white clip level.
Page 128
Web screen configurations (continued) z Matrix Matrix Type [Normal, EBU, NTSC, User] Select the type of color matrix. The setting is confirmed with the [Set] button. Normal This item is used to load the preset color matrix data and compensate for the saturation and color phase.
Page 129
Web screen configurations (continued) Lens setting screen [Lens] Max Digital Zoom [×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10] The setting is confirmed with the [Set] button. Set the maximum digital zoom magnification. This is only enabled when [Zoom Mode] is set to [D.Zoom]. Factory settings: ×10 <NOTE>...
Page 130
Web screen configurations (continued) UHD crop setting screen [UHD Crop] <NOTE> • When [Crop Mode] is changed, IP video transmission is temporarily stopped. • When [Crop Mode] is changed from [Off] to [Crop(1080)], the [Format] of [Output] for each of the 12G SDI OUT, 3G SDI OUT and HDMI connectors changes to FHD (1920×1080).
Page 131
Web screen configurations (continued) 3G SDI Out [Crop, FULL] Crop Output Select [Yellow, Green, Magenta] Make the settings for Crop/FULL for images output to the 3G SDI Make the settings for the crop frame for images output to the 3G SDI OUT connector.
Page 132
Web screen configurations (continued) Preset position screen [Preset position] z Preset The setting is confirmed with the [SET] button. When a preset thumbnail is clicked, the camera moves to face towards a preset position that was registered beforehand. You can select Home and Preset001 to Preset100.
Page 133
Web screen configurations (continued) z Limitation Setting z Preset Setting This establishes the up, down, left and right limit settings of the pan-tilt head. Preset Speed Unit [Speed Table, Time] First, use the control pad to rotate the pan-tilt head to the position you When reproducing the information such as camera direction want to set as the limit.
Page 134
Web screen configurations (continued) Fall S-Curve [0 to 30] Fall Ramp Time [0.1s to 10.0s] Sets the S-curve for pan/tilt deceleration operation in 31 steps. (The S Sets the deceleration time for time specified operations during preset playback. (Sets between 0.1 s to 10.0 s in 0.1s increments) becomes stronger, the greater the number) During the fall acceleration operation for operating at the specified This is enabled only when [Preset Acceleration] is [Manual] and...
Page 135
Web screen configurations (continued) Preset Crop [Off, On] Preset Iris [Off, On] When the preset memory is played back, set whether the When the preset memory is played back, set whether the reproduction of content set in the various [Crop Mode] menus is off/ reproduction of the values in the various menus related to Iris is off/ When set to [On], the content set in the various [Crop Mode] menus is When set to [On], the values set in the various menus below are...
Web screen configurations (continued) - After switching [Preset Speed Unit] Collaboration capability [Linkage] - When executing [Reset to the default (Except the network Tracking data output settings screen [Tracking settings)] of [Maintenance] Data Output] IP(UDP) [On, Off] Select the output mode of the tracking data and the communication Sets the UDP output function [On] or [Off] to output tracking data, destination in the IP mode.
Page 137
Web screen configurations (continued) z IP out Port Sets the destination port number to forward the tracking data such as Pan/Tilt/Zoom or other information via UDP. The setting is confirmed with the [Set] button. The following port numbers are used by the unit so they cannot be used.
Page 138
Web screen configurations (continued) P2 Cast connection setting screen [P2 Cast] Sets enable/disable connection to P2 Cast and the connection destination. The setting is confirmed with the [Set] button. Mode [On, Off] Sets whether to enable connection to P2 Cast. Factory settings: Off Cloud URL Sets the server URL of P2 Cast to be connected when [Mode] is [On].
Web screen configurations (continued) z Add user User management screen [User mng.] The users and personal computers (IP addresses) that can access the unit from personal computers and mobile terminals are registered in the User management screen [User mng.]. The User management screen [User mng.] consists of [User auth.] and [Host auth.].
Page 140
Web screen configurations (continued) Host authentication screen [Host auth.] z Add host Click the [Host auth.] of User management screen [User mng.]. Configure the host authentication settings that restrict the personal computers (IP addresses) that can access the unit. z Setting status ...
Web screen configurations (continued) z IPv4 network Network setup screen [Network] Configure network settings in the Network setup screen. DHCP [On, Off] The Network setup screen [Network] consists of [Network] and Select the method in which the IP address is configured. [Advanced].
Page 142
Web screen configurations (continued) z IPv6 network z Common (to IPv6/IPv4) Manual [On, Off] HTTP port [1 to 65535] Enable or disable manual configuration of the IPv6 address. Port numbers are allocated separately. The following port numbers are used by the unit so they cannot be Enter the IPv6 address manually.
Page 143
Web screen configurations (continued) Easy IP Setup accommodate period Recommended network setting for internet [20min, Unlimited] Perform the recommended settings to connect the camera to the Internet. Select [20min] or [Unlimited] as the time for enabling the operation of When the [Execute] button is clicked, a dialog box will be displayed. the network settings from the Easy IP Setup Software.
Page 144
Web screen configurations (continued) When “Streaming mode” is set to “JPEG(UHD)” Advanced network setting screen [Advanced] JPEG(1) Click the [Advanced] in the network setup screen [Network]. Refresh interval: 1fps Settings relating to the NTP, UPnP and HTTPS functions are performed Image quality: Normal here.
Page 145
Web screen configurations (continued) z NTP z UPnP Settings relating to the NTP server address and port No. are performed This unit supports UPnP (Universal Plug and Play). Using the UPnP here. function allows the following to be set automatically. The setting is confirmed with the [Set] button.
Page 146
Web screen configurations (continued) z HTTPS CA Certificate ‑ Generate Certificate Signing Request Using the HTTPS function enables access to the camera to be When using a security certificate issued by the Certificate Authority encrypted and communication safety to be improved. (CA) as a security certificate for HTTPS, a Certificate Signing Request The setting is confirmed with the [Set] button.
Page 147
Web screen configurations (continued) HTTPS port [1 to 65535] z RTSP This sets the Port No. to be used with HTTPS. This performs settings related to the RTSP function. The RTSP function The following port numbers are used by the unit so they cannot be sets the RTSP transmission port and RTSP request URL used during IP used.
Page 148
Web screen configurations (continued) HTTPS settings [HTTPS] This encrypts access to the camera and sets HTTPS to improve communication safety. Setting HTTPS is performed by following the procedures below. The setting is confirmed with the [Set] button. 1. Generating a CRT key (SSL encryption key) (→...
Page 149
Web screen configurations (continued) Generating a CRT key (SSL encryption key) Generating a self‑signed certificate (security [CRT key generate] certificate) <NOTE> [Self‑signed Certificate ‑ Generate] • A CRT key cannot be generated when self-signed certificates and <NOTE>...
Page 150
Web screen configurations (continued) Click the [OK] button after inputting the address. Click the [Execute] button in [CA Certificate ‑ Generate A self-signed certificate is generated. Certificate Signing Request]. <NOTE> The [CA Certificate - Generate Certificate Signing Request] dialog is •...
Page 151
Web screen configurations (continued) Installing a Server Certificate Setting the Connection Method [CA Certificate ‑ CA Certificate install] [Connection] <NOTE> • A server certificate (security certificate) cannot be installed if a Set the method to access the camera in [Connection]. Certificate Signing Request (CSR) has not been generated.
Page 152
Web screen configurations (continued) z Install the security certificate Click [Certificate error] in the URL and then click [View When using HTTPS to access the camera, the security warning certificates]. screen will be displayed if the security certificate of the said camera has not been installed in your personal computer.
Page 153
Web screen configurations (continued) Select [Place all certificates in the following store] and Click [Finish]. click [Browse...]. Click [Yes]. Select [Trusted Root Certification Authorities] and click [OK]. Click [Next]. When importing is finished, the “The import was successful.” screen is displayed. Click [OK].
Web screen configurations (continued) [Error log1, Error log2] Maintenance screen [Maintenance] On this screen, you can check the system logs, check the version of the Displays the log sequence numbers. software, initialize the unit, etc. “1” indicates the latest information, and up to 100 logs can be saved. The Maintenance screen consists of four settings: [System log], [Product info.], [Default reset] and [Backup].
Page 155
Web screen configurations (continued) Product information screen [Product info.] FPGA Network The versions of the unit’s software can be checked on this screen. Displays the version of the Network module. The [Model no.], [MAC address], [Serial no.], [Firmware version] and other information about the unit is displayed.
Page 156
- All settings under [Network - Network] check the precautions to be observed, and follow the instructions. - [HTTPS - Connection] • Use the following files specified by Panasonic Corporation as the - [HTTPS - HTTPS port] software used for version upgrading.
Page 157
Web screen configurations (continued) Back up screen [Backup] Upload Config data type On this screen, the unit’s settings can be saved to a personal computer [Camera(ALL), Camera (SCENE1) to Camera (SCENE4), Camera or settings saved in a personal computer can be loaded into the unit for (SYSTEM), Camera (PRESET), Network] use.
Displaying the web screen using a personal computer equipped with a touch panel PTZ operation screen for touch panels Button for displaying the PTZ operation screen for touch Button for restoring the screen from the touch panel panels operation screen The screen switches to the one for PTZ operations for touch panels Press this button to return to the usual live screen.
Page 159
Displaying the web screen using a personal computer equipped with a touch panel (continued) Preset operation screen for touch panels Image adjust operation screen for touch panels Preset operation area for touch panels Image adjust operation area for touch panels This is the area where buttons for preset operations are located that This is the area where buttons for iris, gain, balance adjustments, are suitable for use with touch panels.
Displaying the web screen using a mobile terminal It is possible to perform operations using a design suited to mobile terminals in the live screen in a web browser. Access the unit from the mobile terminal. As when accessing the unit from a personal computer, enter [http://IP address/] in the address bar of the web browser on the mobile terminal. The screen for mobile terminals is displayed automatically.
Page 161
Displaying the web screen using a mobile terminal (continued) Button for displaying the operation menu for the live Home button screen Move to the preset home position. Use this to display the operation menu for the live screen. Preset thumbnail operation area When a preset thumbnail is clicked, the camera moves to face towards a preset position that was registered beforehand.
Limiters This unit comes with settings (referred to as “limiters”) that restrict the panning and tilting movement ranges. Depending on the installation location, obstacles that may come into contact with the remote camera may exist within its movement range. In such cases, setting the limiters before the obstacles will prevent contact.
Setting/releasing the limiters Basic limiter operations Releasing the limiters Press the <MENU> button. The limiter positions that are set can be released by following the steps below. Tap the button (rather than pressing it). When it is pressed for 2 When the position is released, the tally lamp blinks twice.
Safe mode Concerning the safe mode The unit goes into the safe mode when the pan-tilt head is forcibly moved by an external force or when something impedes its rotation. Once the safe mode has been established, some or all of the operations will no longer be acknowledged to ensure safety and prevent equipment damage.
– – – → For details on upgrading, visit the support page on the following website. https://pro-av.panasonic.net/ • Has the stand‑alone (Desktop) installation setting been selected correctly? page 73, page 108 The unit turns in the opposite •...
Page 166
Troubleshooting (continued) Symptom Cause and solution Reference pages • Has a LAN cable of category 5e or above been connected to the LAN connector Installation Instructions for IP control <LAN LINK/ACT>? → “Connections” • Is the [LINK] LED of the LAN connector for IP control lit? →...
Page 167
Troubleshooting (continued) Symptom Cause and solution Reference pages For Windows: • Press the [F5] key on the keyboard of the personal computer to request that the settings be acquired. – – – For Mac: • Press the [Command] + [R] key on the personal computer's keyboard to request that the settings be acquired.
Page 168
Troubleshooting (continued) Symptom Cause and solution Reference pages • Is the [Status Lamp] setting set to [Disable]? Status display lamp does not light → If [Status Lamp] is set to [Disable], the status display lamp does not light when this page 70, page 108 unit is working properly.
Page 169
Troubleshooting (continued) Video Symptom Cause and solution Reference pages Installation Instructions • Has the unit been connected properly to the other connected devices? → “Connections” • If the system is configured in such a way that the picture is also switched when page 36 the unit to be operated is selected, has the correct unit been selected? No pictures are displayed or the...
Page 170
Troubleshooting (continued) Symptom Cause and solution Reference pages • Activate the ATW (Auto tracking white adjustment) function. page 44 Something is wrong with the • In some situations, the proper colors may not be reproduced using the ATW coloring of the pictures function.
Page 171
Troubleshooting (continued) IP images Symptom Cause and solution Reference pages For Windows: • Is the plug‑in viewer software installed? page 33 → Install the plug‑in viewer software. For Windows: • If [Check for newer versions of stored pages] is not set to [Every time I visit the webpage] in the temporary Internet file settings, IP images may not appear in the Images are not displayed live screen [Live].
Page 172
Troubleshooting (continued) Symptom Cause and solution Reference pages • If the “Network Camera View 4S” plug‑in viewer software is deleted in an environment where the “Network Camera View 3” plug-in viewer software is installed, display of H.264 images will become impossible. –...
Page 173
"This website wants to run the • Select [Allow]. – – – following add‑on: 'WebVideo Module' from 'Panasonic System Networks Co., Ltd.'." The following message appears in the information bar. "This website wants to install the • Select [Install]. When the security warning window appears, click the [Install] –...
( excluding protrusions, cable cover, mount bracket) Lens: Motorized Optical 24× zoom, F1.8 to F4.0 [f=4.12 mm (5/32 inches) to 98.9 mm Finish: AW-UE100WP/AW-UE100WPC/AW-UE100WE/ (3-29/32 inches); 35 mm (1-3/8 inches) equivalent: AW-UE100WED: Pearl white 25.0 mm (31/32 inches) to 600.0 mm (23-5/8 inches)] AW-UE100KP/AW-UE100KPC/AW-UE100KE/ i.Zoom (UHD: 28×, FHD: 36×)
Index Numerics ×1.0 button ..................Cable clamp ..................3G SDI ..............CA Certificate 3G SDI Out ..............CA Certificate install ............3G SDI OUT connector ............... Generate Certificate Signing Request ....... 12G SDI ............... Information ................12G SDI OUT connector ..............Camera ................
Page 177
Index (continued) HTTPS mode ..................HTTPS port ..................HTTPS Port number ................Easy IP Setup accommodate period ..........HTTPS Status ..................Easy IP Setup Software ............... HTTP Status ..................EEPROM ..................ELC Limit ..................Enc ....................Encryption ..................Image adjust ..................Error code ..................
Page 178
Index (continued) MAC address ..................P2 Cast ....................Main area ..................... Pan head ..................... Main/Network ................ Pan/Tilt ............Maintenance ................. Pan/Tilt Lens Control ................. Manual ..................Passphrase ..................Manual shooting .................. Password ................... Master Detail ................PC Synchronization ................Master pedestal ................... Pedestal Offset ................
Page 179
Index (continued) Safe mode ..................Tally ..................... Saturation ................Tally Brightness ................Scene ................. Tally lamp .................... Scene1 ....................Temperature ..................Scene2 ....................Time adjustment interval ..............Scene3 ....................Time Zone ..................Scene4 ....................Tone .................... Scene All ..................... Top Menu .................... Scene file .....................