Hitachi MC-WU5506M User Manual page 19

leaning and replacing the air lter (continued)
9.
Turn the projector on and reset the lter time using the ILTER TIME item in
the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the ILTER TIME using the
cursor (or the ENTER / the RESET) button. A dialog will appear.
(3) Press the
resetting the lter time.
WARNING
cable is not plugged in, then allow the projector to cool suf ciently.
Use only the air lter of the speci ed type. Do not use the projector without
the air lter or the lter cover. It could result in a re or malfunction to the
projector.
Clean the air lter periodically. If the air lter becomes clogged by dust or the
like, internal temperatures rise and could cause a re, a burn or malfunction to
the projector.
NOTE • Please reset the lter time only when you have cleaned or replaced
the air lter, for a suitable indication about the air lter.
• The projector may display the message such as the "CHEC THE AIR LOW"
or turn off the projector, to prevent the internal heat level rising.
cursor button to select the "O " on the dialog. It performs
efore taking care of the air lter, make sure the power
/ cursor buttons, then press the
19