Replacing The Lamp - Hitachi MC-WU5506M User Manual

Replacing the lamp

A lamp has nite product life. Using the lamp for long periods of time could cause
the pictures darker or the color tone poor. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare
a new lamp, make contact with your dealer and tell the lamp type number.
Type number : DT01931
1.
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.
2.
Prepare a new lamp. If the projector is mounted
with speci ed mounting accessories, or if the lamp
has broken, also ask the dealer to replace the lamp.
In case of replacement by yourself, follow the following
procedure.
3.
Loosen the screw (marked by arrow) of the lamp cover
and then slide down and lift the lamp cover to remove it.
4.
Loosen the 3 screws (marked by arrow) of the
lamp, and slowly pull the lamp out by the handles.
Never loosen any other screws.
5.
Insert the new lamp, and retighten rmly the
3 screws of the lamp that are loosened in the
previous process to lock it in place.
6.
While putting the interlocking parts of the lamp
cover and the projector together, slide the lamp
cover back in place. Then rmly fasten the screw
of the lamp cover.
7.
Turn the projector on and reset the lamp time
using the LAMP TIME item in the SETUP menu.
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using the
/ button, then press the
(3) Point at the SETUP in the left column of the menu using the
press the button.
(4) Point at the LAMP
(5) Point at the LAMP TIME using the
dialog will appear.
(6) Press the button to select "O " on the dialog. It performs resetting the lamp time.
CAUTION
taken out.
NOTE • Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
16
button.
ILTER using the
Do not touch the interior of the projector, while the lamp is
/ button, then press the
/ button, then press the
Lamp cover
3
4, 5
Handles
6
/ button, then
button.
button. A