Table of Contents
Advertisement
Chapter 3 Starting Up
3.17 Installing the OS
$ ssh -p 9001 hpcipmi@{BMC IP address}
hpcipmi@{BMC IP address}'s password:
The initial password for hpcipmi is "HPCIPMI".
4.
Power on the node.
Specify "Power on" in [Power Control] on the [Power Control] screen of the Web GUI. Specify "02h" in
[Boot Script Number].
For details, see "3.3 Power Control" in the FUJITSU Supercomputer PRIMEHPC FX700 BMC User's
Guide (C120-0091EN).
5.
Install the OS.
When the node has started up and the installation screen appears, install the OS according to the
instructions displayed on the console connection screen.
If you prepared the kickstart file, the OS is automatically installed.
6.
Restart the node. Power off and then on again the node with the installed OS.
To restart the node, specify [reset] in [Power Control] from the [Power Control] screen of the Web GUI.
Specify "00h" in [Boot Script Number].
For details, see "3.3 Power Control" in the FUJITSU Supercomputer PRIMEHPC FX700 BMC User's
Guide (C120-0091EN).
3.17.2
OS Driver Installation Procedure
The following is the procedure for applying the OS drivers for FX700 hardware.
The BMC driver is required for basic operations (such as powering on/off the node).
The CPU-MEM-RAS driver is required for CPU and memory failure detection.
Driver RPM files are available online.
For the Japanese market
https://www.fujitsu.com/jp/products/computing/servers/supercomputer/downloads/
For the global market
https://www.fujitsu.com/global/products/computing/servers/supercomputer/documents/
Remarks
The version numbers of the driver packages vary depending on the OS version number.
(1) BMC driver RPM file: FJSVxosbmc-xxxxx.aarch64.rpm
(2) CPU-MEM RAS driver RPM file: FJSVxoscpuras-xxxxx.aarch64.rpm
This procedure assumes that the OS supported by the drivers has already been installed and the kernel
supported by the drivers has already been applied on the FX700 node.
1.
Power on the FX700 node to start the OS.
See "3.3 Power Control" in the FUJITSU Supercomputer PRIMEHPC FX700 BMC User's Guide
(C120-0091EN).
2.
Transfer the OS driver RPM files.
54
C120-0089-03EN
Advertisement
Table of Contents
