Chapter 3 Starting Up
3.13 Installing/Removing the FANU
- Push the device until it is locked.
2.
Repeat step 1 to install a FANU in every other mounting location.
3.
Install the bezel.
Screw
4.
Insert the left and right guide pins into the chassis, and fix the front panel in place with two
screws.
3.13.2
Removing the FANU From the Chassis
This following is the procedure for removing the FANU from the chassis.
1.
While the first lock is unlocked (1), pull out the FANU in the direction of (2).
Figure 3.28 FANU Installation Completed
Figure 3.29 Installing the Bezel
Guide pin
Screw
47
Guide pin
C120-0089-03EN