Table of Contents
Advertisement
Altos S205F / S200F User's Manual
Figure 1–9
The Altos S205F RAID I/O Module operates at 1 or 2 Gb/s.
• One external port for expansion to further enclosures is provided by an SFP connector
• Two external ports to the host controllers are provided from the RAID I/O Module with Form
• An RJ45 10/100 Base T Ethernet controller management port is provided on the LRC board, in-
Caution
The RJ45 Ethernet connector on the LRC module must not be connected to telecommunications
networks.
• The RAID I/O Module also incorporates a standby Li-ion battery pack, 72 hours cache hold up
Figure 1–10
Altos S205F RAID I/O Module
Factor (SFP) GBIC modules, auto-bypass at the output ports is provided.
terfacing to the controller through 2 RS232 serial and GPIO lines.
time (512MB), or 60 hours cache hold up time (1GB). The battery cell has thermal protection
and is connected to the RAID I/O Module by flying lead.
Altos S200F JBOD I/O Module
10
not used
Advertisement
Table of Contents
