Introduction Of Connectors And Headers; System Board Jumper Setting; System Board Header Setting - Acer Aspire E700 Service Manual

Introduction of Connectors and Headers

System Board Jumper Setting

Features
Intruder pin (1*2) & default
setting
BIOS_SEL1 (1*2) & default
setting
Clear CMOS (1*3) & default
setting
OBR (1*2) & default setting

System Board Header Setting

Front Panel
FP1
1
Orange1 Green2
3
Orange3 Green4
5
Blue5 Red6
7
Blue7 Red8
9
Black9
11
Orange11 Green12
13
Orange13 Green14
Header_2X7_K10
Chapter 5
Default Setting
No active
Enable SPI
2-3: normal (default)
No active
# Pin Definition
1 5V_SYS
2
4
2 GPIO_GRN_HDR_R
6
3 HDD_LED_R
8
4 GPIO_YLW_HDR_R
12
5 GND
14
6 PSIN
7 ICH_SYS_RSTJ
8 GND
9 5V_SYS
10 Key
11 NC
12 GND
13 NC
14 LAN_ACTJ
Remark (color and other)
Short will have the warning
message The case has been
opened, press F1 to continue.
Description
Hard disk LED pull-up (330 ohm) to
5V_SYS
Pull-up (330 ohm) to 5V_SB_SYS and
connect To to SIO GPIO
Hard disk active LED
Pull-up (330 ohm) to 5V_SB_SYS and
connect to SIO GPIO
Reset button
Power button
ICH_SYS_RSTJ
Ground
5V_SYS
Key
Reserved
Ground
Reserved
LAN active LED
56