Operating Instructions
Setting
Camera Name
White Balance
AC Power
Source
Frequency
Automatic
Focus Range
Mounting Type
70
•
The camera name is displayed on the Single Camera
page.
•
Enter ASCII characters (see page 150) or characters in
each language (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). But [Space],
["], ['], [&], [<], and [>] are not available.
Select from the following options.
•
Auto (default)
•
Fixed Indoor
•
Fixed Fluorescent
(White)
•
Fixed Fluorescent
(Daylight)
•
Fixed Outdoor
•
Hold
Note
White balance is also saved in the home position, alarm
position and preset buttons.
It can select Flicker Correction by power line frequency.
•
60 Hz (default)
•
50 Hz
Select 60 Hz in the United States.
Set to "Macro" when viewing objects that are within 1 m (40
inches) of the camera. Set to "Normal" when viewing objects
that are 1 m (40 inches) or further from the camera.
•
When positioning the camera in front of a window to view
images on the other side of the window, set the Automatic
Focus Range to "Normal".
Set to match the installation method used to mount the camera.
•
When set to "On the ceiling", the available tilt range is 0 to
+90 degrees.
•
When set to "On the table", the available tilt range is -120
to 0 degrees.
Description
— Automatic adjustment
— Electric bulb (2800 K)
— White (3600 K)
— Daylight (4000 K)
— Solar light (6000 K)
— Setting [Hold] keeps the current
white balance.