Table of Contents
Advertisement
en Cleaning and servicing
Ensure that both impellers can
3.
turn.
Insert the pump cap.
4.
Ensure that the parts of the
‒
pump cap are correctly as-
sembled.
Insert the pump cap and screw it
5.
on as far as it will go.
90°
The handle on the pump cap must
be in a vertical position.
50
Insert the maintenance flap and
6.
lock it into place.
1
Close the maintenance flap.
7.
17.6 Cleaning the intake
opening in the rubber
gasket
Regularly check the intake opening
in the rubber gasket for any block-
ages and clean the intake opening.
Open the door.
1.
Check the intake opening for
2.
blockages and remove any block-
ages.
Note: Do not use any sharp or poin-
ted objects.
17.7 Cleaning the water outlet
hose at the siphon
Switch off the appliance.
1.
2
Advertisement
Table of Contents
