Specification - Toshiba D-R2SU Owner's Manual

Others

Specification

I Power requirement during operation
34W
I Power requirement at standby
2.7W or below (Eco mode: off)
0.8W or below (Eco mode: on)
I Power supply
120V AC, 60 Hz
I Mass
4.2kg
I External dimension
Width 430 x Height 78 x Depth 325mm
I Incoming channels
TV: 2-69CH, Cable:1-125CH
I Antenna input/output terminal
VHF/UHF: 75Ω, F Connector
I Signal system
Standard NTSC Color TV system
I Laser
Semiconductor laser, Wavelength: 650nm/780nm
I Format
DVD-VR format
DVD-Video format
I Image recording system
MPEG2
I Sound recording system
Dolby digital M1, M2, Linear PCM
144
I VIDEO input
1.0Vp-p (75Ω), Sync signal negative,
Pin jack x 3 systems, 2 at rear, 1 in front
I VIDEO output
1.0Vp-p (75Ω), Sync signal negative,
Pin jack x 1 systems, 1 at rear
I S-VIDEO input
(Y) 1.0Vp-p (75Ω), Sync signal negative,
(C) 0.286Vp-p (75Ω), 2 at rear, 1 in front
Mini DIN4 Pin x 3 systems
I S-VIDEO output
(Y) 1.0Vp-p (75Ω), Sync signal negative,
(C) 0.286Vp-p (75Ω), 1 at rear
Mini DIN4 Pin x 1 system
I COMPONENT output (Y, P
Y output (green), 1.0Vp-p (75Ω),
Sync signal negative, Pin jack x 1 system
P , P output (blue, red), 0.7Vp-p (75Ω),
B R
Pin jack x 1 system each
I AUDIO input
2.0V (rms), 50kΩ or below, pin jack
(L, R) x 3 systems
2 at rear, 1 in front
I AUDIO output
2.0V (rms), 200Ω or above, pin jack
(L, R) x 1 system
1 at rear
I DIGITAL AUDIO OUTPUT
BITSTREAM/PCM (OPTICAL terminal)
Optical connector x 1 system
I CHANNEL CHANGE IR jack
This is for connection of the supplied IR control cable
only.
I DV input
4-pin x 1 in front
, P )
B R