Rear Panel - Toshiba D-R2SU Owner's Manual

Introduction
Index to parts and controls (Continued)

Rear panel

1
1
AC IN socket page 15 in "INSTALLATION
GUIDE"
Connects the supplied power cord.
2
Ventilation fan
3
VHF/UHF RF IN (FROM ANT.) input socket
page 14 in "INSTALLATION GUIDE"
Connects to an antenna or cable signal.
4
VHF/UHF RF OUT (TO TV) output socket
page 14 in "INSTALLATION GUIDE"
Connects the supplied coaxial cable to a TV.
5
INPUT1/INPUT3 jacks
Use this to connect the recorder to output jacks of
external devices such as another player or
camcorder.
6
COMPONENT OUTPUT jacks
"INSTALLATION GUIDE"
Outputs video signals to a connected TV or
monitor.
Connects to a TV or monitor equipped with
component video jacks.
14
2 3 4
RF IN
(FROM ANT.)
RF OUT
(TO TV)
CHANNEL
CHANGE
VHF/UHF
7
page 36
page 20 in
5
DIGITAL AUDIO OUTPUT
S-VIDEO BITSTREAM/PCM
R L VIDEO
INPUT1
INPUT3
IR R L VIDEO OPTICAL
S-VIDEO
8
7
CHANNEL CHANGE IR jack
"INSTALLATION GUIDE"
Connect the supplied IR control cable to control
cable/satellite channels according to timer
programs.
8
DIGITAL AUDIO OUT BITSTREAM/PCM
OPTICAL jack
"INSTALLATION GUIDE"
Use this to connect the recorder to an audio
receiver equipped with an optical digital audio
input jack.
When connecting the optical digital cable, remove
the cap and fit the connector into the jack firmly.
When not using the jack, keep the cap inserted to
protect it from dust intrusion.
6
Y P P P B B B P R
COMPONENT OUTPUT
OUTPUT
R L VIDEO
S-VIDEO
9
page 19 in
page 22, 23, 24 in