Set - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
ADDRESS NO.
4
BIT
ITEM
NO.
Zero-skip in All
Department and
1
Department Group
Reports
Zero-skip in PLU
2
Reports
Zero-skip on Financial
3
and Cashier Reports
4
Cashier feature
Cashier No. Display on
5
Operator Display
PLU Price Level Display
6
on Operator Display
7
-- vacant --
8
-- vacant --
NOTE 1: If SET, the cashier feature is not active as the registering operation is possible without cashier sign-ON.
• Cashier read and reset operations are not possible. Doing so may cause an error.
• Cashier signing operation (inputting 4-digit numeric values then [LOG]) in REG mode may cause an error.
• Cashier name is not printed on the validation slip.
• The cashier name portion on the receipt and the journal will be blank. Prior to changing this bit status from RESET to SET,
the cashier daily/GT reset should be performed to clear the cashier memory. If the bit status is changed without performing
the reset operation, the cashier memory data will not be guaranteed.
NOTE 2: If SET, the Cashier No. of the signed-ON cashier is always displayed on the Department Code position (2 digits). Even when a
department entry is performed, the Cashier No. is displayed instead of the department code.
NOTE 3: If SET, the PLU Price Level is always displayed on the second leftmost digit of the 7-segment Numeric display.
System Option Table
CONTENTS
OPTIONAL FUNCTION II
SELECTIVE STATUS
RESET PRINT all Departments data

SET

ZERO-SKIP
RESET PRINT all PLUs data
SET ZERO-SKIP
RESET PRINT all items data
SET ZERO-SKIP
RESET ACTIVE
SET NON-ACTIVE
RESET NOT DISPLAYED
SET DISPLAYED (NOTE 2)
RESET NOT DISPLAYED
SET DISPLAYED (NOTE 3)
RESET
SET
RESET
SET
-- Address No. 5 is vacant. --
6-25
6.5 System Option Programming
Standard Bit Set (auto-set by RAM Clear)
STANDARD
REMARKS
STATUS
*
Departments/Groups
with no sale will be
skipped in the report.
*
*
*
NOTE 1 below
*
When both SET or both
RESET, Department
*
No. will be displayed.
*
*
EO3-11106
23