Drawer Warning Time Setting - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
6.38

Drawer Warning Time Setting

This operation sets the number of seconds as the period of time for the cash drawer remaining open until the
alarm buzzer is generated to warn operator to close the drawer.
Any time outside a sale
CONDITION
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [↓] five times then [Enter].
Depress [↓] four times then [Enter].
Input a numeriv value of time to start
the drawer warning buzzer.
NOTES:
1. The value of 0 second cannot be set. (To cancel the drawer warning function, reset the warning option
itself.)
2. After a RAM Clear, the value of 15 seconds is set as the default setting.
3. The setting here is effective only when the following are both selected in the system option programming:
Address No. 27 - Bit No. 1 SET: Drawer-close compulsory
Address No. 27 - Bit No. 2 SET: Drawer warning alarm ACTIVE
4. The drawer warning error is cleared only by closing the drawer. This error cannot be cleared by turning the
Mode Lock to any position.
5. The drawer warning time is processed only in REG, MGR, and – modes.
Main Menu
or
Depress [6].
or
Depress [5].
[End]
6-159
ECR is being outside a sale and in SET mode.
"6 OTHER" is selected.
"5 DRW WARNING TIME" is selected.
Max. 2 digits: 1 to 99 (seconds)
This programming is ended.
display returns to Main Menu screen.
EO3-11106
6.38 Drawer Warming Time Setting
A long receipt is issued and the