4. Remove the center lock screw.
5. Remove the burnishing pad.
6. Remove the 3 screws and the pad holder.
32
7. Examine the burnishing pad and the pad holder for
cracks and damage. Replace damaged parts.
8. Install the burnishing pad and the pad holder in the
opposite sequence.
To replace the coupling
WARNING:
parts are fully stopped.
1. Remove the burnishing pad. Refer to
burnishing pad on page 31 .
2. Remove the 6 screws and the mounting plate.
3. Remove the 3 M10x45 countersunk head screws
and the coupling adapter plate.
Make sure that all moving
To replace the
1823 - 003 - 13.04.2022