3. How to Attach Adjunctive Equipment
There are no Double Side Tape, etc. attached on the
new Front Bezel to be replaced with.
Apply adjunctive equipment such as Double Side Tape
by consulting the following, then assemble the Front
Bezel.
1. Double Side Tape (Top side)
Attach the Double Side Tape on the top side of the
Front Bezel.
The beginning of the paste is center engraving.
Less than 0.5mm
2. Double Side Tape (Left/ Right)
Attach the Double Side Tape on the left and right
side of the Front Bezel.
The beginning of the paste is upper cushion edge.
* Bilateral symmetry
Less than 0.5mm
3. Rubber Spacer
Attach the Rubber Spacer over the Front Bezel.
The beginning of the paste is engraving of side.
Rubber Spacer
Do not paste it
on this blue plane
Do not paste it
over this edge
Do not paste it
on this blue plane
Do not paste it over this edge
4. Diffusing Plate Cushion
Attach the Diffusing Plate Cushion over the Front
Bezel.
Front Bezel (R)
4-9
Front Bezel (L)
Front Bezel (D)
PL22.06-A_DC