3 Servicing
Electrical components
PCBc
Plastic holder
Plastic holder
PCBd
Plastic holder
82
SMGB0120 rev.0 - 11/2017
Plastic holder
a. Remove the PCB by pressing
the expanded part of the 4
plastic holders, using long-
nose pliers, as shown in the
picture below.
b. Pull the PCB out from the
PCB plate.
a. Remove the PCB by pressing
the expanded part of the 4
plastic holders, using long-
nose pliers, as shown in the
picture below.
b. Pull the PCB out from the
PCB plate.