2 Control Functions
Control of Master/Slave group
2.3.6 Method for setting and confirmation of operation conditions through the LCD
screen
Conducts the setting of the control of Master/Slave group and confirmation of operation conditions through the LCD
screen.
46
SMGB0120 rev.0 - 11/2017
In the case of master
unit (unit 1) setting
Set the setting temperature difference (when
the 1st water temperature setting is enabled)
Set the setting temperature difference (when
the 2nd water temperature setting is enabled)
In the case of slave unit
(units 2 to 8) setting
If there are more
than 5 units
connected, shift
to priority setting
screen of units
after unit 5