Cleaning The Device; Troubleshooting - Bosch SmartGrow 3 User Manual

en Cleaning the device
Quantity
6 x 18 g
12 x 18 g

Cleaning the device

After descaling, clean all parts thoroughly.
→ Fig. -
23 24
Accessories
Accessory
Height module
Boosting light
module
Blooming light
module

Troubleshooting

Pump starts 1 to 7 times a day.
Normal watering cycle
Your device automatically performs op-
▶
timum watering.
Pump makes loud or unusual noises
compared with normal watering.
Too little nutrient solution in the water bowl.
Pour nutrient solution into the water
▶
bowl.
→ "Topping up with nutrient solution",
Page 14
Pump is blocked or furred up.
Descale and clean the pump.
▶
→ "Descaling the appliance", Page 15
→ "Cleaning the device", Page 16
16
Order number
311864
311893
Designation
MSGZHB1
MSGZHB2
MSGZHB3
Notes
¡ Clean all parts as indicated in the clean-
ing overview.
¡ After drying re-assemble all parts in re-
verse order.
Assembling the watering unit
→ Fig.
25
Overview of cleaning
→ Fig.
27
Use
Insert another height module when the plants have
almost reached the light unit. You can insert up to
4 height modules.
For an additional portion of light. This way, your
plants grow faster and can be harvested earlier.
Tip: For perfect results, up to two boosting or
blooming light modules can be used alternately to
match the height modules.
The special light for blooming. For maximum
blooming and richer harvesting.
Tip: For perfect results, up to two boosting or
blooming light modules can be used alternately to
match the height modules.
Light unit does not light up.
Device is not connected to the power
supply.
Check whether the power supply is
1.
plugged into a socket.
Check whether the connecting cable is
2.
properly connected to the pump.
Ambient temperature above 40 °C. The
overtemperature protection has switched
the device off.
Check whether the location is suitable in
1.
the long term.
→ "General information", Page 14
Close curtains or blinds to lower the
2.
room temperature.
-
26
Printed on 100% recycled paper