Operation
Switching the product on/off
Switching the product on: Set the function
button
to an operation mode (see "Choosing
1 ]
[
a mode").
The ON/OFF indication light
confirm that the product is operating (Fig. A).
Switching the product off: Set the function
to 0
button
[
1 ]
[
light
switches off.
[
]
Choosing a mode
Set the function button
corresponding to the desired mode (Fig. B).
Mode
Function
button
Mode 1
[
]
Mode 2
[
]
Mode 3
[
]
* While keeping the water warm
Using the product without
pedicure attachment
Move your feet back and forth on the massage
rollers
for a reflex zone massage.
[
]
The recommended operation time is 15 minutes.
switches on to
[
]
. The ON/OFF indication
]
to the icons
1 ]
[
Function
Vibration massage
Bubble bath*
Vibration massage and
bubble bath*
Using the product with pedicure
attachment
The product includes 3 pedicure attachments:
Pedicure attachment
Massager
3 ]
[
Callus remover
6 ]
[
Brush
[
7 ]
Place the desired pedicure attachment
onto the pedicure attachment adapter
Place the remaining 2 pedicure attachments
onto the 2 slots on the pedicure attachments
storage
.
[
5 ]
Rub your foot with gentle pressure on the
pedicure attachment placed on the pedicure
attachment adapter
You may vary the application area on your foot
by changing the position of your foot on the
pedicure attachment.
After use
Switch the product off (see "Switching the
product on/off").
Disconnect the supply cord with power plug
from the power outlet.
Empty the water container
bathtub or shower.
Function
Massage
Removing hardened
skin
Massage
3 ]
[
[
6 ]
.
4 ]
[
.
4 ]
[
into a large sink,
8 ]
[
GB/IE/NI
[
7 ]
[
]
11