Advertisement
The product may have a hot
surface during operation. Persons
insensitive to heat must be careful
when using the product.
m ATTENTION! Risk of product
damage! Do not add any
additives, like oil, to the water
container. After the water has
evaporated, these additives may
burn and damage the product.
Fire/burn hazard and heat
m DANGER! Risk of fire! Never
leave the product unattended
while it is plugged in.
Never select the keep warm
function if there is no water inside
the water container
10 GB/IE/NI
.
8 ]
[
˜ Before first use
Remove all packaging materials.
Clean the product and its accessories
(see "Cleaning and care").
˜ Preparation
Fill the water container
water in the desired temperature.
m
ATTENTION! Risk of product damage!
Do not fill in water at a temperature exceeding
42 ºC. Always check the water temperature
before placing your feet inside or switching on
the product.
Do not fill water above the MAX marking
Do not splash water on the function button
the ON/OFF indication light
the product.
Do not remove the massage rollers
guard
, except when cleaning the product
[
2 ]
(see "Cleaning and care").
NOTES:
Only use clean water. Do not add any soap,
bath salts or any other substances to the water
container
.
[
8 ]
Do not operate the product without having filled
in water first.
Before and after each use: Clean the product
(see "Cleaning and care").
Place the product on an even, stable, heat-
resistant, clean, non-slippery and dry floor.
Connect the supply cord with power plug
suitable socket outlet.
up to MAX
with
8 ]
[
[
9 ]
9 ]
[
1 ]
[
or the base of
[
]
or splash
[
]
to a
[
]
.
,
Advertisement
