Preparatory Work - Siemens MOBILETT Plus Installation Instructions Manual

Installation

Preparatory work

Fig. 1 Removal of MOBILETT covers
1. System OFF.
2. Disconnect the mains cable.
3. Remove the system upper cover (pos. 1 / Fig. 1). With MOBILETT Plus HP,
disconnect K106.
4. Switch S10 to discharge position.
5. Wait 5 minutes to allow the capacitor banks to discharge. Then remove the side
covers (pos. 2 / Fig. 1), the column cover (pos. 2 / Fig. 2) and the cover with the
cassette compartment (pos. 3 / Fig. 1).
6. For MOBILETT Plus HP only: Remove the protective cover in front of the
batteries. Disconnect one of the blue battery connector pairs.
Siemens AG
Medical Solutions
4
6
3
SPR8-220.031.04
Rev. 04 09.03
2
5
2
Page 1 of 30 MOBILETT Plus/ -E/ -HP
CS PS 24
2 - 1
2
1