Haier HB WH-Filter M10 Manual page 20

Transport and installation
To avoid damage during transport to the installation
location, do not remove the product from the
packaging until you have reached the relevant
location. Then dispose of the packaging in the
correct manner. Check that the delivery is complete.
If there is a risk of frost, drain all components that
convey water.
Lift or transport the product or its components only
from the designated suspension eyes or attachment
points, if present.
The product must be installed or mounted on a
sufficiently strong and level horizontal surface and
must be adequately secured against falling or
tipping.
Symbols used
This symbol indicates general risks
due to the mains voltage. Risk of
death by electric shock!
This symbol indicates that this electrical
and electronic equipment must not be
disposed of with household waste at the
end of its life.
This symbol indicates that the
product can be recycled at the
end of its life.
This symbol indicates information or
instructions that you must observe
in order to ensure safe operation.
Unplug device before any service
and repair works.
How safety instructions are displayed
In this document safety instructions precede any
sequence of actions that could cause harm to
persons or damage to property. All hazard preven-
tion measures must be followed.
Safety instructions are displayed as follows:
Source of hazard (e.g. electric shock)
Type of hazard (e.g. risk of fatal injury)!
Escape or prevent hazard
Rescue measure (optional)
Signal word / colour
Warning symbol
Source / type
of hazard
Consequences
of hazard
Hazard prevention
measure
Signal word Color Colour Severity of the hazard
DANGER
WARNING
CAUTION
Product-specific safety instructions
Electrical hazard!
Contact with live components will
cause electric shock.
Unplug device before any service
and repair works.
If the mains cable of the unit is
damaged, it must be replaced by the
original BWT connection cable.
The optimum operating pressure of
the product is between 2 and 8 bar.
In the following sections, you will find product-spe-
cific safety instructions whenever you must perform
certain safety-relevant actions on the device.
2
2
Indicates the severity
of the hazard
Calls attention to the hazard
Indicates the type and the
source of the hazard
Explains the consequences
of not following the
safety instructions
Explains how to
avoid the hazard
High-risk hazard.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Hazard with a moderate degree
of risk.
Indicates a hazardous situation
which, if not avoided, could
result in death or serious injury.
Low-risk hazard.
Indicates a hazardous situation
which, if not avoided, may result
in minor or moderate injury.
NOTE