Black & Decker BDFH44M Instruction Manual page 14

CLEANING AND CARE
Cleaning the Base Filter and Heat Exchanger
WARNING
Unplug before Cleaning.
Do not operate the dryer without the base filter and heat exchanger in place.
Clean the Base Filter Every 5th Cycle
1. Open the heat exchanger access cover on the bottom left of the dryer by
pressing on the tabs.
2. Unlock the three levers and grasp the handle to pull out to remove.
3. Remove lint and rinse using tap water to make sure all debris is removed.
4. Clean all the rubber seals.
5. Make sure it is completely dry before re-installing.
6. Put the levers back into the lock position.
7. Close the cover. There will be a click sound when it is closed completely.
Cleaning the Heat Exchanger Every 2 Months
The heat exchanger is located behind the base filter.
WARNING
Do not touch the heat exchanger after the dryer has been in use. It may be hot and
cause burns.
1. Remove the lint from the heat exchanger using a vacuum cleaner with a dusting
brush attached.
2. Clean the heat exchanger without applying any pressure. Otherwise, the heat
exchanger could be damaged. The dryer will not dry if the cooling fins are
damaged or bent.
Page 14
Press
Press
The heat
exchanger is
located behind
the base filter.
Base Filter