Sony UYA-S90SF Service Manual page 10

Mounting the Auto Slide Feeder on the Film
Scanner
When you want to prescan/scan multiple slides continuously, mount the
supplied auto slide feeder on the film scanner.
Note
The mounting should be performed on a rigid, flat surface such as on a
desk, as the screw on the auto slide feeder cannot support the weight of the
auto slide feeder.
Install the film scanner on a base which covers the auto slide feeder.
1
Remove the side panel of the film scanner and the cover of the slide
feeder connector.
2
Mount the auto slide feeder on the film scanner.
Insert the two projections on the rear of the auto slide feeder into the
slits on the film scanner, and the connector to the slide feeder
connector.
For easier positioning, place the auto slide feeder parallel to the side of
the film scanner, then fit the square projected part of the auto slide
feeder to the film scanner as illustrated.
6
(GB)
Insert the
connector.
Insert the projections.
3
Tighten the screw to secure the auto slide feeder.
Note
To avoid damaging the screw of the auto slide feeder, do not tighten it
excessively.
7
(GB)