LG SV-iC5 Series Instruction Manual page 139

EMC INSTALLATION GUIDE
LG inverters are tested to meet Electromagnetic Compatibility (EMC) Directive 89/336/EEC and Low Voltage (LV)
Directive 73/23/EEC using a technical construction file. However, Conformity of the inverter with CE EMC requirements
does not guarantee an entire machine installation complies with CE EMC requirements. Many factors can influence total
machine installation compliance.
Essential Requirements for CE Compliance
Following conditions must be satisfied for LG inverters to meet the CE EMC requirements.
1. CE compatible LG inverter
2. Installing inverter in an EMC enclosure
3. Grounding enclosure and shielded parts of wire
4. Using shielded cable
5. Use it under industrial environment.
6. It is important that all lead lengths are kept as short as possible and that incoming mains and outgoing motor cables
are kept well separated.
INVERTER
No Models
1 SV004iC5-1F
2 SV008iC5-1F
3 SV015iC5-1F
4 SV022iC5-1F
5 SV004iC5-1
6 SV008iC5-1
7 SV015iC5-1
8 SV022iC5-1
Models No. 1, 2, 3 and 4 are EMC Filters integrated and compliant with CE.
EMC Filters are not provided for models No. 5, 6, 7 and 8. They should be provided with Interface Module 2
for CE compliance.
* Module 1: Non-Filter Type PCB Assembly
** Module 2: Filter Type PCB Assembly
Description
AC Drive, 0.5HP, 220V,
1 phase
AC Drive, 1HP, 220V,
1 phase
AC Drive, 2HP, 220V,
1 phase
AC Drive, 3HP, 220V,
1 phase
AC Drive, 0.5HP, 220V,
1 phase
AC Drive, 1HP, 220V,
1 phase
AC Drive, 2HP, 220V,
1 phase
AC Drive, 3HP, 220V,
1 phase
SHIELDED CABLE
Interface Module1*
-
-
-
-
10120001681
10120001682
10110001458
10110001458
iii
Interface Module 2**
-
-
-
-
10120001677
10120001678
09710000110
09710000110
MOTOR
CE Mark
EMC LVD
Yes 1
Yes 2
Yes 3
Yes 4
Yes 5
Yes 6
Yes 7
Yes 8