Connection With A Tv Or Stereo System - Kenwood Sovereing DV-5700 Instruction Manual

Connection with a TV or Stereo System

TV
SCART connection (For U.K. and Europe):
Connect the TV SCART connector to the TV's input connector.
Connect the VCR SCART connector to the VCR's input
connector.
Select the video connection method
according to the TV in use. When S-Video
cable is connected, the ordinary video
connection is not necessary.
10
Audio connection: To audio input jacks
Video connection: To video input jack
Component video connection: To color difference (C
To color difference (C ) input jack
B
To luminance (Y) input jack
S Video connection: To S Video input connector
S Video cable (provided)
DIGITAL OUTPUT
(PCM/BIT STREAM)
T V S C A RT
COAXIAL OPTICAL
V C R S C A RT
Audio cable (provided)
Video cable (provided)
) input jack
R
Video cable (optional)
Video cable (optional)
Video cable (optional)
COMPONENT
VIDEO OUTPUT
1 2
Y C C
B R
INTERFACE PROGRESSIVE
VIDEO
S VIDEO OUTPUT COMPONENT VIDEO OUTPUT
OUTPUT
Select the scanning method of the Component Video output
using the COMPONENT VIDEO OUTPUT switch on the
rear panel.
INTERLACE: Scanning method is fixed at interlaced
scanning.
PROGRESSIVE: When progressive scanning is unavailable
with certain discs, the scanning method is switched
automatically to interlaced scanning. When the scanning
method is changed, the scanning status will be displayed
for a few seconds.
Chapter 1: Connection of Equipment
Stereo system
Audio connection: To audio input jacks
Audio cable (provided)
CENTER
L
1
2
R
FRONT SURROUND SUB WOOFER
M I X L I N E
6 CH. OUTPU T
O U T P U T